h6. [[Programmer's Reference Manuals]] h6(. » [[*Commands]] h6((. » *Configure FontMax4 h2. *Configure FontMax4 h4. Use This *Command sets the configured maximum width at which to use horizontal subpixel anti-aliasing. h4. Syntax *Configure FontMax4 _max_width_ h4. Parameters |<^{width:8em}. _max_width_|<^. Maximum width of font to use horizontal subpixel anti-aliasing (in Points)| h4. Notes This setting is only valid with 4bpp screen modes. Before this setting is used, the following checks are made; # Look for f9999x9999 file of the correct size, then; # Look for x90y45 font of the correct size; # If the above checks fail to produce an output will it consider the values of [[*Configure FontMax2|FontMax2]] and [[*Configure FontMax3|FontMax3]], then FontMax4 and [[*Configure FontMax5|FontMax5]] ** If the font pixel width is less than or equal to FontMax 4, then it will look for the Outline file, and construct 4 anti-aliased bitmaps for each character. ** If the font pixel height is less than or equal to the height in FontMax5, then both horizontal and vertical subpixel anti-aliasing occurs. This equates to 16 bitmaps to be constructed per character. Pixel width = width in points x pixels per inch / 72 The pixel height varies depending on the different resolution of screen mode. h4. See also * [[Font_ReadFontMax]] * [[Font_SetFontMax]] * [[*Configure|*Configure]] * [[*Configure FontMax1|*Configure FontMax1]] * [[*Configure FontMax2|*Configure FontMax2]] * [[*Configure FontMax3|*Configure FontMax3]] * [[*Configure FontMax5|*Configure FontMax5]]