h6. [[Programmer's Reference Manuals]] h6(. » [[*Commands]] h6((. » *Configure NoBoot h2. *Configure NoBoot h4. Use This *Command sets the configured boot action so that a Shift-power-on, shift-reset or Shift-Break runs a boot file. h4. Syntax *Configure NoBoot h4. Parameters None. h4. Notes If the shift key is pressed when a machine is powered on, or reset, then a boot will take place. The boot process looks for the <code>&.!Boot</code> file, and runs it if it finds it, as set by the [[*Opt 4|*Opt 4]] command. A boot process can be disabled at any time by issuing [[*FX|*FX]] 255 command. NoBoot is the default setting. Any change takes effect on the next power-on or hard reset. h4. See also * [[*Configure|*Configure]] * [[*Configure Boot|*Configure Boot]] * [[*FX|*FX]]