h2. Overview At present the port consists of three components: * A "HAL":/wiki/documentation/show/Hardware%20Abstraction%20Layer targetting TI’s "OMAP5432":http://www.ti.com/product/omap5432 system-on-chip. * The standard ‘HAL’ version of the RISC OS 5 kernel and the standard ROM modules * Additional custom driver modules, e.g. "EHCIDriver":/wiki/documentation/show/RISC%20OS%205%20USB%20stack%20overview, OMAPHDMI as required At present the port is known to be functional on the following hardware devices: * "IGEPv5":https://labs.isee.biz/index.php/IGEPv5 * "TI OMAP5432 EVM":https://web.archive.org/web/20170717234637/http://www.ti.com/tool/omap5432-evm The port is currently a work in progress. Users with an adequate backup strategy in place may wish to try the new features present in the "beta version":/wiki/documentation/show/Software%20information:%20OMAP5:%20Beta%20OMAP%205%20ROM instead. h2. Current status The "RISC OS Roadmap":/wiki/documentation/show/RISC%20OS%20Roadmap covers items which are not specific to the OMAP 5, and the "bug tracker":/tracker covers defects in existing components. This table covers planned future tasks or areas that are yet to be implemented on OMAP 5. table(bordered). |_\3. Enhancements to existing OMAP 5 functionality | |_. Task |_. Description/Status |_. Assigned to | | OMAP5 HAL - Audio | HDMI audio not supported (due to lack of documentation). Audio only available through on-board headset connector (J1500 for IGEPv5, or J13 for TI EVM). | Unassigned | | OMAPHDMI | No support for 256 colour screen modes. Note that errata i596 precludes 1/2/4bpp entirely. | Unassigned | | OMAPHDMI | Output drive of HDMI is weak, so many monitors can't get lock, especially via passive HDMI to DVI adapters | Sprow | |_\3. Unimplemented OMAP 5 features | |_. Task |_. Description/Status |_. Assigned to | | OMAP 5 - USB | Add support for USB 3.0 OTG controller | Unassigned |