If you are new to RISC OS you should read [[Introduction to RISC OS]]. The "download link":/content/downloads/omap5 provides a copy of the stable RISC OS ROM image suitable for the following devices: * "ISEE IGEPv5":https://labs.isee.biz/index.php/IGEPv5 * "OMAP5432EVM":https://svtronics.com/5432 To get started with one of these boards, you will also need the OMAP5 firmware and the stable [[Software information: HardDisc4|HardDisc4 image]]. For an explanation of what to do to create an SD card that will let you start up with RISC OS on an OMAP5 board, see [[Generic OMAP port setup information]][1]. If you are upgrading from an older version of RISC OS, see [[RISC OS Upgrade]] instead. fn1. <small>The page only mentions OMAP3 and OMAP4, but the general principles should hold true for OMAP5 as well.</small>