category: RaspberryPi This is an image of a RISC OS boot SD for the Raspberry Pi, suitable for writing to a real SD card using a utility such as "Etcher":https://etcher.balena.io (Windows/macOS/Linux) or "CloneDisc":http://shop.elesar.co.uk/index.php?route=product/product&path=25&product_id=72 (RISC OS). A microSD card of at least 2GB capacity is required. If you use a larger SD card (8GB, 16GB etc.) only the first 2GB will be usable by RISC OS. This software is suitable for models of Raspberry Pi up to and including the Pi 4B and Pi 400. Please note that the Raspberry Pi 5 is <b>not supported</b>. To download this software, visit the "Downloads":/content/downloads/raspberry-pi page and click on <i>RISC OS Pi</i>. h2. Bundled software In addition to the standard HardDisc4 contents, the RISC OS Pi image also includes: Applications * Director * NetSurf * Ovation Pro * PackMan * PipeDream * Store * StrongEd * StrongHlp Diversions * CountDn * Doku * Poker * SChain * SignalBox Documents * Beginners Guide to Wimp Programming * First Steps in Programming RISC OS Computers * RISC OS 3 PRMs * RISC OS 5.30 User Guide Programming * BASIC routines * Charm * Dr Wimp * php * Python * RiscLua Utilities * 7backup * DPlngScan * InterGif * Manuals * PDF * Periodic * PrivatEye * Snapper * SwiftJPEG * SyncDiscs * UnTarBZ2 * WinMenu Other (included in !Boot) * AWViewer * Fat32FS * SpecialFX h2. Further information If you are new to RISC OS you should first read [[Introduction to RISC OS]]. You may also want to read [[Using RISC OS on the Raspberry Pi]].