Strqnge WeatherUK

Strange effects with !WeatherUK running VRPC-DL RO5.23 (12 May 2017).
(it seems to work ok with RO 4.02)

When starting up Wx Icon appears on the Icon bar – then quits with (Abort on data transfer at &FC028194 pc = &82BC)

Since I 32 bitted Internet module some time ago – any ideas where to look for this fault.
(something is setting the Mode to USR26 bit!!)

From WeatherUK’s !Runimage.

&82b4 mov r0,r4
&82B8 bl &1345c > Proc Connect ie swi XSocket_Connect
&82BC cmn r0,#1
*********
showregs
Register dump (stored at &2000D470) is:
R0 = 2000009C R1 = 60000080 R2 = 00000018 R3 = 2000D4B4
R4 = FA207FB0 R5 = 00000000 R6 = 2030E444 R7 = 00000050
R8 = FC0283FC R9 = 00000000 R10 = F9BC603C R11 = 000000D3
R12 = FC029068 R13 = A00000D3 R14 = 00020068 R15 = FC028194
Mode USR26 flags set: nzcvqjggggeaift PSR = 00000000
**********

where
Address &FC028194 is at offset &000078F0 in module ‘UtilityModule’
*memoryI pc-16
FC02817C   MOV R4,#0
FC028180   MOV R3,R0
FC028184   LDR R1,[R4,#2200]
FC028188   MOV R0,#&18
FC02818C   ADD R2,R1,#&44
FC028190   SWI XOS_Memory
*memoryi pc+0
FC028194   AND R1,R1,#&0D
*********

You do not say which version of WeatherUK you are using.

That would be – WeatherUK v1.11 (9 April 2018)

When running a module in RO5 (high memory) – which branch conditions should be checked?

Seem to have got WxUK working now – different modes in VRPC Internet module – saving/loading using different R13! :-|

Main WxUK window seems to not – want to go off screen.
Window flags?

[edit]
!ResEd to edit WeatherUK.res

Window ‘Other Properties’ ’Allow off-screen