Atrix Lapdock - Screen mode

Hi

Does anyone have the MDF mode for a Lapdock they can post?

Thanks

I made this and it seems to work:

startmode
 mode_name:1360 x 768
 x_res:1360
 y_res:768
 pixel_rate:100000
 h_timings:181,198,0,1360,0,32
 v_timings:6,29,0,768,0,3
 sync_pol:3
EndMode

I think the only inportant figures are the screen dimensions. I replaced everything else with 0s. You can juggle with the pixel_rate, which will change the Frame rate in the dialogue, but I am not sure that it does anything specific – or does it?

For the Pi I think that’s true. However, if I’ve made that mode right, then it should work with any RO system.

Hi – I’ve found the Atrix screen to work fine – I used the above MDF and pasted in the others from the Generic file . My only trouble is running mode 12/15 (when using ArcEm or BeeBlt) causes the screen to letterbox with big black bar at top / bottom – is there a way to fix this in the MDF?