Tungsten build from source

After some years I’ve got my Iyonix up and running again.
Out of interest I am trying to build the RISCOS ROM. It seems I have all what is needed and was able to follow the available documentation but the build (https://www.riscosopen.org/zipfiles/sources/src-iyo-dev.5.27.tar.bz2?1593565037) fails.

Is there a source code tarball available that compiles on a Iyonix? Maybe 2.24?

Perhaps it’d be better to download and install the stable 5.24 first, and try building the dev ROM on that?

It should build where does it fail?

What version of Acorn C are you using? (just type cc in a taskwindow)

fails

fails how? Is it a problem with the download or an Iyonix issue? We have no way of knowing from the report given.

The Tungsten development ROM has just built here, on a Titanium, but did need a bit of help. The untarbz2 error’d at the end.

Prepare source code archive 16:35:58
Repeat: Directory 'ADFS::ROOL.$.ROOL.Tungsten.Tungsten.*.RiscOS' not found

Double click on Tungsten.RiscOS.Apps.!Prepare to run an initial script and start !Builder.

The Iyonix is running version 5.24 and has CC ‘Norcroft RISC OS ARM C vsn 5.82 [03 Apr 2020]’.
I was thinking I need to try and build 5.24 first (where is the source) but it seems the 5.27 should build. I’m trying again fresh.
Thanks

It runs a long time but no luck at the end :(

First error is:
FileCore (Sources.FileSys.FileCore)…
amu -E -k export PHASE=hdrs COMPONENT=FileCore TARGET=FileCore
do mkdir -p o
objasm -o o.FileCoreErr s.FileCoreErr -I<Hdr$Dir>.Global,<Hdr$Dir>.Interface
ARM AOF Macro Assembler 3.28 (Acorn Computers Ltd) [20 Jun 2003]
Unrecognised APCS qualifier /fpe3
Error: Unexpected characters at end of line at line 33 in file s.FileCoreErr
33 00000844 ALIGN 4, 0, 10
Assembly terminated:
1 Error, 0 Warnings
AMU: * exit (1) *

Things like:
cc -c -depend !Depend -DDDE -fK -zz10000000 -jC: -ffah -DFIELDNUM -DBIG_WINDOWS -DSETOPTIONS -DALLOW_OLD_PATTERNS -DSET_MISC_OPTIONS -zM -o m_o_rl.xfersend rlib.c.xfersend
Norcroft RISC OS ARM C vsn 5.82 [03 Apr 2020]
“rlib.c.xfersend”, line 47: Serious error: #include file “swis.h” wouldn’t open
“rlib.c.xfersend”, line 505: Warning: <argument 1 to ’dragasprite_start’>: cast of ‘int’ to differing enum
rlib.c.xfersend: 1 warning, 0 errors, 1 serious error
AMU: * exit (1) *

And the end is:
objasm -depend !Depend -g -APCS 3/nofp/noswst -cpu 5TE s.RTC o.RTC
ARM AOF Macro Assembler 3.28 (Acorn Computers Ltd) [20 Jun 2003]
Unrecognised APCS qualifier /fpe3
Error: Unrecognised machine: Tungsten at line 384 in file Hdr:CPU.Arch
included by GET/INCLUDE directive at line 18 in file “Hdr:System”
included by GET/INCLUDE directive at line 17 in file “s.RTC”
384 00000000 ! 1, “Unrecognised machine: Tungsten”
Error: Invalid parameter separator in macro prototype at line 827 in file Hdr:CPU.Generic32
included by GET/INCLUDE directive at line 20 in file “Hdr:System”
included by GET/INCLUDE directive at line 17 in file “s.RTC”
827 00000000 SE$op $mode, $regtmp, $oldpsr
Error: Bad GET or INCLUDE at line 20 in file Hdr:System
included by GET/INCLUDE directive at line 17 in file “s.RTC”
20 00000000 SE$op $mode, $regtmp, $oldpsr
Assembly terminated:
3 Errors, 0 Warnings
AMU: * exit (1) *

AMU: * ‘install_rom’ not re-made because of errors *

Error running make install_rom on module ‘HAL_Tungsten’.
Fatal error running make install_rom on module ‘HAL_Tungsten’.
Batched errors…
Error running make export (hdrs) on module ‘Filer_Action’.
Error running make export (libs) on module ‘Filer_Action’.
Error running make resources on module ‘Filer_Action’.
Error running make rom on module ‘Filer_Action’.
Error running make install_rom on module ‘HAL_Tungsten’.
-—————————————————————————————————————-
Closing log file ‘ADFS::HardDisc4.$.downloads.Tungsten.RiscOS.BuildSys.Logs.aUIT00-00’.

At build I had all boxes with Export or ROM in the name ticked

ARM AOF Macro Assembler 3.28 (Acorn Computers Ltd) [20 Jun 2003]

Why is objasm so old when cc (almost) up to date.

In DDE29c :-

*cc -help
Norcroft RISC OS ARM C vsn 5.83 [01 Jun 2020]

*objasm -help
ARM AOF Macro Assembler 4.08 (Acorn Computers Ltd) [01 Jun 2020]

Because I messed up. Checking my email history and memory I found I installed a emailed DDE update but failed to get the original DDE29 personalised ZIP file electronic download.

Thanks for spotting that.

Now I need to see how I can get access to the personalised ZIP file electronic download.

I did get a new link by emailing ctools@riscosopen.org and after successful download and install of DDE29c the RiscOS 5.27 build went fine.
Thanks all for the help.