Aliexpress USB Network adapter under RISCOS

Recently I ordered an USB to ethernet adapter from Aliexpress search for “Otg 3 Poort Usb 2.0 Hub 10/100Mb Micro Usb Naar Rj45 Lan Adapter Netwerkkaart” and than choose the wrong one ;-) . I wondered if it would work under RISCOS.
The driver under Microsoft Windows is reported as : “WCHUSBNICxxx” where xxx stands for the architecture. This leads to the “CH397/CH9152” chipset, further investigations into the LINUX driver source gives us that driver is a “Communications Device Class (CDC)” compliant device.
These devices are now supported native under RiscOS 5.30 as part of the USB bounty but in this case it needs some tweaking
Make in !Boot.Choices.Boot.Predesk an obey file with the lines:
*Set EtherUSB$Product_1A86_E396 CDC:CONF2
*RMReinit EtherUSB
It may be necessary to remove /move the file ‘ENetPick’ from !Boot.Choices.Boot.Predesk in cases where there is an onboard ethernet controller.

This was tested on :
- Pi400
- Pi Zero W