Problems with autostarting and saving pinboard

OK so I’m not sure what I’ve done but the last thing I remember doing with this computer was trying to install printing (although I’m still not convinced if that was this Pi or the other one!)

Anyway−the problem I have is the Pinboard will not save any new changes and none of my selected applications auto-launch at startup (despite putting them in the Run list (within !Boot).

Any ideas what I might have screwed up?

Have you omitted to add the lines:

1. New lines for separate CMOS file
   ramfsfile=CMOS
   ramfsaddr=0×508000
   #

to the CONFIG.TXT file on this m/c, and are thus not saving the CMOS file?

Sorry – Textile has interpreted the first hash as a numbered point, and I can’t be bothered to fix it!

PS Remember you need to save a file manually first – the system won’t create it if absent!

Thanks John…turns out that I was simply booting off the wrong disc!

On the computer that I’m working on it uses a Pi Zero with bootloader on the SD card but actually boots off a disc connected to an mSATA port.

Can’t remember why but I must have switched to boot off the SD card and used the computer for a bit (loading some things into the autostart/pinboard) then switched back to the SSD and not remembered doing any of it!

Maybe I need more coffee today?