Missing Configuration icons

And now for a tale of the truly wierd.

On the RPi3B+ double click on !Boot after start up, on both OS5.24 and OS5.25 (22-Jun-18)

Accompanied by this error :-

26 Jun 19:35:34 002 80000002: Error from Configure: Internal error: abort on data transfer at &200574F8

*where
Address &200574F8 is at offset &000574F8 in dynamic area 'Module area'
*showregs
Register dump (stored at &2001A9D0) is:
R0  = 3B8169C0 R1  = F5FC127C R2  = 3B815B80 R3  = 00000000
R4  = 00000000 R5  = 00000000 R6  = 00000640 R7  = 00000000
R8  = 000000FF R9  = 00000028 R10 = 00000028 R11 = 00000005
R12 = 200564B4 R13 = FA207E90 R14 = 00DEDEDE R15 = 200574F8
Mode SVC32 flags set: nZCvqjggggeAift        PSR = 60000113
*

The cause was found by a process of elimination. AcornC/C++.!SetPaths was configured to be ‘Looked at’, remove that and the fault goes away. Further digging showed the real problem was the iconsprites in AcornC/C++.Apps.DDE.!SrcEdit.!Boot, comment it out and the fault goes away.

I even tried two other Pi’s, an RPi3 and RPi1, and got the same on both.

Just to prove sanity left a while ago, another way to clear the fault is to configure StrongED to be ‘Looked at’ in Boot configuration.

(The remains of my memory is thinking missing configure icons has been reported before.)

There is no sign at all of this issue on the Titanium.

The sound config icon was missing a few versions ago.