TimeServer & Power OFF on PandaRO

With the CJE/4D power control module fitted to a PandaBoard and the time setting is :“Get time from network” then when shutting down you get as expected the Iyonix type message “The computer will switch off in five seconds” but after five seconds the system stiffs with a frozen pointer. RMKILLing the time server module nettime before shutting down and the problem goes away!
So there appears to be an issue between the module and the OS shutdown routine.
We’ve not noticed it before as we have time in !Configure Set to be:“set manually” as of course we have a battery backed RTC fitted.
n.b. Running !Configure and selecting Time and date causes the module nettime to be loaded, even if no changes are made!
So if you run it to check the time settings do do a rmkill nettime after closing the window.