Hermes 2.66 RO5.23 VRPC-DL

Hi
Changing POPStar to Hermes 2.66 – to get SMTP SSL with Gmail.
Send is working ok with RO4.02 VRPC-DL.

But with RO5.23 VRPC-DL – Hermes crashes out with a error in CLib 5.92 (28May 2016) when contacting Gmail.

Same s_sockets module used in both ro’s.

Any ideas
Thanks
**********
Register dump (stored at &2000D470) is:
R0 = 00042708 R1 = 000443DC R2 = 00067000 R3 = F60690FF
R4 = FA207EF0 R5 = 00000038 R6 = 00000000 R7 = 000442DC
R8 = 0000C7A8 R9 = 000425E8 R10 = 00000005 R11 = 000426A4
R12 = 000442DC R13 = FA208000 R14 = FC15E750 R15 = FC15E7A4
Mode SVC32 flags set: nzCvqjggggeaift PSR = 20000013
where
Address &FC15E7A4 is at offset &0003160C in module ‘SharedCLibrary’
*memoryi pc-8
FC15E79C : 0B.å : E51A4230 : LDR R4,[R10,#-560]
FC15E7A0 : .@$à : E0244003 : EOR R4,R4,R3
***********

FC15E79C : 0B.å : E51A4230 : LDR R4,[R10,#-560]

Oooh, yeah… R10 is five so R10-560 is going to be some nonsense wraparound figure.

Didn’t know MemoryI accepted “PC-8”. That is really useful, saves the horribleness of copying hex values and knocking off a few to see the real offending instruction.

Sorry, no help for your case, but thanks for a little bit of education. ;-)

After all these years it is surprising what you pick uk :-)

Strange one this – rmsave clib and reloaded it.
Since you can load ‘CLib’ once – but are the pointers changed?

Is there a softloadable ‘CLib’ with ‘proc info added’?

Did this after ‘Hermes’ and modules had loaded.
Did a quick send to myself and it worked!!

Is ‘Hermes’ calling a extra prog?
It doesn’t seem to work all the time though – crashing ‘Hermes’.