CLOCK SETTING IN CMOS

Is possible to save clock settings in cmos widget? i’m trying but it doesent works.

You can’t save the time and date to the cmos, you need to either fit a battery for the onboard clock chip, or get the BeagleBoard to set it’s time from the Internet using ‘NetTime’

See this thread for more info – http://www.riscosopen.org/forum/forums/5/topics/377
The NetTime module is in HardDisc4 download, so you should have it already.

If i have understood i have to make an Obey file?
Can you help me make it for NetTime?

thanks

that post is a little confused or i’m a little stupid : ).

I think you can probably make Obey files now, so I guess you’re referring to its contents. The various commands to set it up can be tested from a Command Window. Do Ctrl-F12 and one will open in Edit. *Help NetTime should list nettime_status etc. When you’ve got it set up (hopefully per the previous discussion in that thread above) put the relevant commands into your new Obey file. You needn’t worry about the location of the Obey file for the moment: just save it somewhere obvious and convenient and double-click on it after booting to test it. (I think you probably can use *Echo within it to confirm that it’s being run when you double-click.)

Instead of creating an obey file you can add the settings to the Network ‘user Options’ file.

First double-click on !Boot, then click Network, next click Internet. Finally double-click on ‘User Options’. Add the following to the bottom of the file.

| Nettime stuff
Set NetTime$DST European
Set Inet$TimeServer ntp2.demon.co.uk
Set NetTime$Server < Inet$TimeServer >

Next time you reboot and have an internet connection the date and time should be set correctly.

It doesent works!!!
there is a way to reset the CMOS WIDGET?

i have also a problem with netsurf, when i clisk for example over risc os open link in google i get en error message that say: error setting certificate verify location Continue. And the page doesent load.

netsurf

Try saving Choices and restarting.

it works for netsurf not the same for nettime : (.

now it works but i’m 1 our back of my time.

How about Daylight Saving Time (set via Alarm)?

how i set DST?
Do you know Trevor how to reset CMOS WIDGET?

Press ctrl-f12

*help dst
*help timezone

If you just want to reset the boot drive. Just unplug all the drives and reboot. Press escape once the prompt appears, then

*configure scsifsdrive 0

Plug the USB key back in and reboot.

I assume you had it set to ‘4’ before.

thank you

Glad it’s sorted. Sorry, I don’t have a CMOS widget.

I have other 2 issue in pandaboard risc os, when i click shutdown and after reset the pandaboard gone black but doesent restart, and there is and issue with sound for example when i open netsurf i hear 2 ore 3 poc poc sound.

Risc os open usb stick are arrieved : )