Ethernet on RISCOS not detectable

Hi,

I am running RISCOS for my first time. I tempered a bit with the OS and its windows, but it doesn’t detect my Ethernet adapter. It has only a USB-to-Ethernet adapter mentioned in its networking.

Anybody knows how may I let the RISC OS detect the ethernet adapter?

I am using Raspberry Pi 3.

Best,

Amjad

For RPi 3, just use the internal Ethernet (which is internally USB-based, which might be source of the confusion). Make sure you are using a current RISC OS version (5.24).

Thanks. I will try and see how it goes.

Yup. That worked now. Thank you.
There is something confusing though. At the first boot the Ethernet port was not connected. When it tried to get an IP address from DHCP upon the first boot (but it fails to get an IP address from DHCP), it switched the settings to “manual” rather than “DHCP” for IP address assignment! When I connected the port after booting, it didn’t initiate DHCPDISCOVER! it falled back to manual settings! that that what got me confused because even when I connected the Ethernet port it didn’t get an IP address.

I had to go to the settings and manually swtich the IP address assignment method to DHCP to get it to work. I could have put a manual IP address though to get it to work, but I wanted to make sure that DHCP is working fine with RISC. Now it is working fine. Thank you.