RPi4 WIP lspci

@sprow

Does this help, Raspbian on RPi4.

pi@raspberrypi32:~ $ lspci -vx
00:00.0 PCI bridge: Broadcom Limited Device 2711 (rev 10) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 55
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00000000-00000fff
	Memory behind bridge: f8000000-f80fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
00: e4 14 11 27 46 01 10 00 10 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 00 00 00 00
20: 00 f8 00 f8 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 48 00 00 00 00 00 00 00 37 01 01 00

01:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host Controller (rev 01) (prog-if 30 [XHCI])
	Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller
	Flags: bus master, fast devsel, latency 0, IRQ 56
	Memory at 600000000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
00: 06 11 83 34 46 05 10 00 01 30 03 0c 10 00 00 00
10: 04 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 83 34
30: 00 00 00 00 80 00 00 00 00 00 00 00 37 01 00 00

pi@raspberrypi32:~ $ 

@sprow Does this help

That was speedy – thanks. I’ve packed away the Pi4 now (need a bigger desk!) but will decipher the bridge settings and see what I might have missed.