Code bc. p.

Test: On this site, bc full stop twice with p full stop does work, but it needs text to follow the pdot. I think pre code text /pre /code is the better option in some situations. See ref here and below for the detail.

Example 1. Pre, and code

004c9c90 : e1a00000 : MOV R0,R0
004c9c94 : e1a00000 : MOV R0,R0
004c9c98 : e1a00000 : MOV R0,R0
004c9c9c : e1a00000 : MOV R0,R0 

Some more test text that uses bcdotdot and pdot

004c9c90 : e1a00000 : MOV R0,R0
004c9c94 : e1a00000 : MOV R0,R0
004c9c98 : e1a00000 : MOV R0,R0
004c9c9c : e1a00000 : MOV R0,R0

Many thanks to Martin and Steve – your comments helped a lot.

Testing…

some text 
more text

I think you just need a blank line at end of section then a pdot
See https://www.riscosopen.org/wiki/documentation/show/Forum

Martin, thank you. pdot requires text to follow it, on the same line or the line below for it work.

pdot requires text to follow it, on the same line or the line below for it work.

But if there’s no text following the code block, it doesn’t need to be closed with a p. – it can just finish of its own accord.