SD card image

By simply adding a few files in the !Boot.Loader DOS image file (the FAT partition) I can use the SD card from my Pandaboard ES in my Raspberry Pi. (Note the rom image for each is different, with a different name.) The only ‘problem’ is that (on the Pi) Aemulor gives the error ‘This copy of Aemulor was not installed on this machine, see buyit.spellings.net for advice Press any key to continue’ but the boot process then continues OK.

Presumably the official RISC OS SD card image, when it appears (perhaps at the RISC OS London show at Feltham on 27th October?), will be capable of running on Beagleboard, Pandaboard or Raspberry Pi (and if not can easily be adapted to do so)? The start up files they use are different from machine to machine (except that Pandaboard and Beagleboard use files with the same name but these may be the same actual files?).

the official RISC OS SD card image, when it appears

Would make a nice Christmas present for a child with a Raspberry Pi? Educational, likely to absorb them for quite some time.

The start up files they use are different from machine to machine (except that Pandaboard and Beagleboard use files with the same name but these may be the same actual files?).

AFAIK the u-boot file for the panda and beagle boards differ and do not run on the other board.
Certainly a quick check of strings in the beagle u-boot shows board version recognition for beagle versions only.
Early versions of the u-boot don’t work with new revisions, new versions are backward compatible.