i.MX6 support
David Feugey (2125) 2709 posts |
Here is a complete list of the low cost i.MX6 boards. Hummingboard (same format as the Pi. 3 versions) RIoTboard (1 version) CuBox-i (with case. 3 versions) Wandboard (3 versions. Case is optional) Udoo (3 versions) Mars Board I.MX6 (1 version) Utilite (with case. 3 versions) Matrix (with case. 1 version) Nitrogen 6 (3 versions) Sabre Lite (1 version) And for geeks: Rex iMX6 (2 versions) Novena (1 version, many possibilities) Just need to test RISC OS on all of them now :) |
Grahame Parish (436) 481 posts |
I’ve got a Wandboard Quad that was going to be used in another (cancelled) project that I can run tests on if needed… |
rob andrews (112) 200 posts |
This has got to be the best of the development boards has it has a wide range of boards available at www.variscite.com |
Andrew Rawnsley (492) 1445 posts |
I would strongly urge people not to just rush out and buy i.MX6 hardware “on the off-chance”. This is a commercial project with commercial partners, including hardware designers. Whilst we may be able to help you, I don’t want to make you promises that I can’t keep, and I don’t want you to be disappointed. |
Chris Hall (132) 3558 posts |
Just spotted this: in the CVS – do we know of a machine that uses an SD card Edit: to store CMOS settings but does not use a boot FAT partition?
|
Steve Pampling (1551) 8172 posts |
Anything that boots from a Filecore “disc”? |
Chris Hall (132) 3558 posts |
For those who couldn’t get to the ROUGOL London show, there is a copy on the R-Comp web site of the handout that they were giving out at the show about their new machine. For those who have sent a deposit, the first of the bi-weekly-ish progress reports was sent out yesterday. |
lucky (3323) 1 post |
MYS-6ULX Single Board Computer maybe the cheapest i.MX6 NXP board on the market. |
Steve Revill (20) 1361 posts |
The iMx6 port for the Wandboard has now been added to the nightly autobuilds, which can be found here. |