Changesets can be listed by changeset number.
The Git repository is here.
- Revision:
- 297
- Log:
Updated to AWStats 7.0.
- Author:
- rool
- Date:
- Fri Mar 18 13:33:29 +0000 2011
- Size:
- 61630 Bytes
- Properties:
- Property svn:executable is set
1 | # AWSTATS CONFIGURE FILE 7.0 |
2 | #----------------------------------------------------------------------------- |
3 | # Copy this file into awstats.www.mydomain.conf and edit this new config file |
4 | # to setup AWStats (See documentation in docs/ directory). |
5 | # The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for |
6 | # Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...) |
7 | # To include an environment variable in any parameter (AWStats will replace |
8 | # it with its value when reading it), follow the example: |
9 | # Parameter="__ENVNAME__" |
10 | # Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with |
11 | # the config value in an AWStats running session and can be used like others. |
12 | #----------------------------------------------------------------------------- |
13 | # $Revision: 1.350 $ - $Author: eldy $ - $Date: 2010/09/29 19:16:21 $ |
14 | |
15 | |
16 | |
17 | #----------------------------------------------------------------------------- |
18 | # MAIN SETUP SECTION (Required to make AWStats work) |
19 | #----------------------------------------------------------------------------- |
20 | |
21 | # "LogFile" contains the web, ftp or mail server log file to analyze. |
22 | # Possible values: A full path, or a relative path from awstats.pl directory. |
23 | # Example: "/var/log/apache/access.log" |
24 | # Example: "../logs/mycombinedlog.log" |
25 | # You can also use tags in this filename if you need a dynamic file name |
26 | # depending on date or time (Replacement is made by AWStats at the beginning |
27 | # of its execution). This is available tags : |
28 | # %YYYY-n is replaced with 4 digits year we were n hours ago |
29 | # %YY-n is replaced with 2 digits year we were n hours ago |
30 | # %MM-n is replaced with 2 digits month we were n hours ago |
31 | # %MO-n is replaced with 3 letters month we were n hours ago |
32 | # %DD-n is replaced with day we were n hours ago |
33 | # %HH-n is replaced with hour we were n hours ago |
34 | # %NS-n is replaced with number of seconds at 00:00 since 1970 |
35 | # %WM-n is replaced with the week number in month (1-5) |
36 | # %Wm-n is replaced with the week number in month (0-4) |
37 | # %WY-n is replaced with the week number in year (01-52) |
38 | # %Wy-n is replaced with the week number in year (00-51) |
39 | # %DW-n is replaced with the day number in week (1-7, 1=sunday) |
40 | # use n=24 if you need (1-7, 1=monday) |
41 | # %Dw-n is replaced with the day number in week (0-6, 0=sunday) |
42 | # use n=24 if you need (0-6, 0=monday) |
43 | # Use 0 for n if you need current year, month, day, hour... |
44 | # Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log" |
45 | # Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log" |
46 | # You can also use a pipe if log file come from a pipe : |
47 | # Example: "gzip -d </var/log/apache/access.log.gz |" |
48 | # If there are several log files from load balancing servers : |
49 | # Example: "/pathtotools/logresolvemerge.pl *.log |" |
50 | # |
51 | LogFile="/var/log/httpd/mylog.log" |
52 | |
53 | |
54 | # Enter the log file type you want to analyze. |
55 | # Possible values: |
56 | # W - For a web log file |
57 | # S - For a streaming log file |
58 | # M - For a mail log file |
59 | # F - For a ftp log file |
60 | # Example: W |
61 | # Default: W |
62 | # |
63 | LogType=W |
64 | |
65 | |
66 | # Enter here your log format (Must match your web server config. See setup |
67 | # instructions in documentation to know how to configure your web server to |
68 | # have the required log format). |
69 | # Possible values: 1,2,3,4 or "your_own_personalized_log_format" |
70 | # 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format) |
71 | # 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA. |
72 | # 3 - Webstar native log format. |
73 | # 4 - Apache or Squid native common log format (NCSA common/CLF log format) |
74 | # With LogFormat=4, some features (browsers, os, keywords...) can't work. |
75 | # "your_own_personalized_log_format" = If your log is ftp, mail or other format, |
76 | # you must use following keys to define the log format string (See FAQ for |
77 | # ftp, mail or exotic web log format examples): |
78 | # %host Client hostname or IP address (or Sender host for mail log) |
79 | # %host_r Receiver hostname or IP address (for mail log) |
80 | # %lognamequot Authenticated login/user with format: "john" |
81 | # %logname Authenticated login/user with format: john |
82 | # %time1 Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss] |
83 | # %time2 Date and time with format: yyyy-mm-dd hh:mm:ss |
84 | # %time3 Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy |
85 | # %time4 Date and time with unix timestamp format: dddddddddd |
86 | # %methodurl Method and URL with format: "GET /index.html HTTP/x.x" |
87 | # %methodurlnoprot Method and URL with format: "GET /index.html" |
88 | # %method Method with format: GET |
89 | # %url URL only with format: /index.html |
90 | # %query Query string (used by URLWithQuery option) |
91 | # %code Return code status (with format for web log: 999) |
92 | # %bytesd Size of document in bytes |
93 | # %refererquot Referer page with format: "http://from.com/from.htm" |
94 | # %referer Referer page with format: http://from.com/from.htm |
95 | # %uabracket User agent with format: [Mozilla/4.0 (compatible, ...)] |
96 | # %uaquot User agent with format: "Mozilla/4.0 (compatible, ...)" |
97 | # %ua User agent with format: Mozilla/4.0_(compatible...) |
98 | # %gzipin mod_gzip compression input bytes: In:XXX |
99 | # %gzipout mod_gzip compression output bytes & ratio: Out:YYY:ZZpct. |
100 | # %gzipratio mod_gzip compression ratio: ZZpct. |
101 | # %deflateratio mod_deflate compression ratio with format: (ZZ) |
102 | # %email EMail sender (for mail log) |
103 | # %email_r EMail receiver (for mail log) |
104 | # %virtualname Web sever virtual hostname. Use this tag when same log |
105 | # contains data of several virtual web servers. AWStats |
106 | # will discard records not in SiteDomain nor HostAliases |
107 | # %cluster If log file is provided from several computers (merged by |
108 | # logresolvemerge.pl), use this to define cluster id field. |
109 | # %extraX Another field that you plan to use for building a |
110 | # personalized report with ExtraSection feature (See later). |
111 | # If your log format has some fields not included in this list, use: |
112 | # %other Means another not used field |
113 | # %otherquot Means another not used double quoted field |
114 | # |
115 | # Examples for Apache combined logs (following two examples are equivalent): |
116 | # LogFormat = 1 |
117 | # LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot" |
118 | # |
119 | # Example for IIS: |
120 | # LogFormat = 2 |
121 | # |
122 | LogFormat=1 |
123 | |
124 | |
125 | # If your log field's separator is not a space, you can change this parameter. |
126 | # This parameter is not used if LogFormat is a predefined value (1,2,3,4) |
127 | # Backslash can be used as escape character. |
128 | # Example: " " |
129 | # Example: "\t" |
130 | # Example: "\|" |
131 | # Example: "," |
132 | # Default: " " |
133 | # |
134 | LogSeparator=" " |
135 | |
136 | |
137 | # "SiteDomain" must contain the main domain name, or the main intranet web |
138 | # server name, used to reach the web site. |
139 | # If you share the same log file for several virtual web servers, this |
140 | # parameter is used to tell AWStats to filter record that contains records for |
141 | # this virtual host name only (So check that this virtual hostname can be |
142 | # found in your log file and use a personalized log format that include the |
143 | # %virtualname tag). |
144 | # But for multi hosting a better solution is to have one log file for each |
145 | # virtual web server. In this case, this parameter is only used to generate |
146 | # full URL's links when ShowLinksOnUrl option is set to 1. |
147 | # If analyzing mail log, enter here the domain name of mail server. |
148 | # Example: "myintranetserver" |
149 | # Example: "www.domain.com" |
150 | # Example: "ftp.domain.com" |
151 | # Example: "domain.com" |
152 | # |
153 | SiteDomain="" |
154 | |
155 | |
156 | # Enter here all other possible domain names, addresses or virtual host |
157 | # aliases someone can use to access your site. Try to keep only the minimum |
158 | # number of possible names/addresses to have the best performances. |
159 | # You can repeat the "SiteDomain" value in this list. |
160 | # This parameter is used to analyze referer field in log file and to help |
161 | # AWStats to know if a referer URL is a local URL of same site or an URL of |
162 | # another site. |
163 | # Note: Use space between each value. |
164 | # Note: You can use regular expression values writing value with REGEX[value]. |
165 | # Note: You can also use @/mypath/myfile if list of aliases are in a file. |
166 | # Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]" |
167 | # |
168 | HostAliases="localhost 127.0.0.1 REGEX[myserver\.com$]" |
169 | |
170 | |
171 | # If you want to have hosts reported by name instead of ip address, AWStats |
172 | # need to make reverse DNS lookups (if not already done in your log file). |
173 | # With DNSLookup to 0, all hosts will be reported by their IP addresses and |
174 | # not by the full hostname of visitors (except if names are already available |
175 | # in log file). |
176 | # If you want/need to set DNSLookup to 1, don't forget that this will reduce |
177 | # dramatically AWStats update process speed. Do not use on large web sites. |
178 | # Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6). |
179 | # Note: Result of DNS Lookup can be used to build the Country report. However |
180 | # it is highly recommanded to enable the plugin 'geoip' or 'geoipfree' to |
181 | # have an accurate Country report with no need of DNS Lookup. |
182 | # Possible values: |
183 | # 0 - No DNS Lookup |
184 | # 1 - DNS Lookup is fully enabled |
185 | # 2 - DNS Lookup is made only from static DNS cache file (if it exists) |
186 | # Default: 2 |
187 | # |
188 | DNSLookup=2 |
189 | |
190 | |
191 | # When AWStats updates its statistics, it stores results of its analysis in |
192 | # files (AWStats database). All those files are written in the directory |
193 | # defined by the "DirData" parameter. Set this value to the directory where |
194 | # you want AWStats to save its database and working files into. |
195 | # Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser" |
196 | # feature (see later), you need "Write" permissions by web server user on this |
197 | # directory (and "Modify" for Windows NTFS file systems). |
198 | # Example: "/var/lib/awstats" |
199 | # Example: "../data" |
200 | # Example: "C:/awstats_data_dir" |
201 | # Default: "." (means same directory as awstats.pl) |
202 | # |
203 | DirData="." |
204 | |
205 | |
206 | # Relative or absolute web URL of your awstats cgi-bin directory. |
207 | # This parameter is used only when AWStats is run from command line |
208 | # with -output option (to generate links in HTML reported page). |
209 | # Example: "/awstats" |
210 | # Default: "/cgi-bin" (means awstats.pl is in "/yourwwwroot/cgi-bin") |
211 | # |
212 | DirCgi="/cgi-bin" |
213 | |
214 | |
215 | # Relative or absolute web URL of your awstats icon directory. |
216 | # If you build static reports ("... -output > outputpath/output.html"), enter |
217 | # path of icon directory relative to the output directory 'outputpath'. |
218 | # Example: "/awstatsicons" |
219 | # Example: "../icon" |
220 | # Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon") |
221 | # |
222 | DirIcons="/icon" |
223 | |
224 | |
225 | # When this parameter is set to 1, AWStats adds a button on report page to |
226 | # allow to "update" statistics from a web browser. Warning, when "update" is |
227 | # made from a browser, AWStats is run as a CGI by the web server user defined |
228 | # in your web server (user "nobody" by default with Apache, "IUSR_XXX" with |
229 | # IIS), so the "DirData" directory and all already existing history files |
230 | # awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if |
231 | # necessary to "Read/Write" (and "Modify" for Windows NTFS file systems). |
232 | # Warning: Update process can be long so you might experience "time out" |
233 | # browser errors if you don't launch AWStats frequently enough. |
234 | # When set to 0, update is only made when AWStats is run from the command |
235 | # line interface (or a task scheduler). |
236 | # Possible values: 0 or 1 |
237 | # Default: 0 |
238 | # |
239 | AllowToUpdateStatsFromBrowser=0 |
240 | |
241 | |
242 | # AWStats saves and sorts its database on a month basis (except if using |
243 | # databasebreak option from command line). |
244 | # However, if you choose the -month=all from command line or |
245 | # value '-Year-' from CGI combo form to have a report for all year, AWStats |
246 | # needs to reload all data for full year (each month), and sort them, |
247 | # requiring a large amount of time, memory and CPU. This might be a problem |
248 | # for web hosting providers that offer AWStats for large sites, on shared |
249 | # servers, to non CPU cautious customers. |
250 | # For this reason, the 'full year' is only enabled on Command Line by default. |
251 | # You can change this by setting this parameter to 0, 1, 2 or 3. |
252 | # Possible values: |
253 | # 0 - Never allowed |
254 | # 1 - Allowed on CLI only, -Year- value in combo is not visible |
255 | # 2 - Allowed on CLI only, -Year- value in combo is visible but not allowed |
256 | # 3 - Possible on CLI and CGI |
257 | # Default: 2 |
258 | # |
259 | AllowFullYearView=2 |
260 | |
261 | |
262 | |
263 | #----------------------------------------------------------------------------- |
264 | # OPTIONAL SETUP SECTION (Not required but increase AWStats features) |
265 | #----------------------------------------------------------------------------- |
266 | |
267 | # When the update process runs, AWStats can set a lock file in TEMP or TMP |
268 | # directory. This lock is to avoid to have 2 update processes running at the |
269 | # same time to prevent unknown conflicts problems and avoid DoS attacks when |
270 | # AllowToUpdateStatsFromBrowser is set to 1. |
271 | # Because, when you use lock file, you can experience sometimes problems in |
272 | # lock file not correctly removed (killed process for example requires that |
273 | # you remove the file manualy), this option is not enabled by default (Do |
274 | # not enable this option with no console server access). |
275 | # Change : Effective immediatly |
276 | # Possible values: 0 or 1 |
277 | # Default: 0 |
278 | # |
279 | EnableLockForUpdate=0 |
280 | |
281 | |
282 | # AWStats can do reverse DNS lookups through a static DNS cache file that was |
283 | # previously created manually. If no path is given in static DNS cache file |
284 | # name, AWStats will search DirData directory. This file is never changed. |
285 | # This option is not used if DNSLookup=0. |
286 | # Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname' |
287 | # or just 'ipaddress resolved_hostname' |
288 | # Change : Effective for new updates only |
289 | # Example: "/mydnscachedir/dnscache" |
290 | # Default: "dnscache.txt" |
291 | # |
292 | DNSStaticCacheFile="dnscache.txt" |
293 | |
294 | |
295 | # AWStats can do reverse DNS lookups through a DNS cache file that was created |
296 | # by a previous run of AWStats. This file is erased and recreated after each |
297 | # statistics update process. You don't need to create and/or edit it. |
298 | # AWStats will read and save this file in DirData directory. |
299 | # This option is used only if DNSLookup=1. |
300 | # Note: If a DNSStaticCacheFile is available, AWStats will check for DNS |
301 | # lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile. |
302 | # Change : Effective for new updates only |
303 | # Example: "/mydnscachedir/dnscachelastupdate" |
304 | # Default: "dnscachelastupdate.txt" |
305 | # |
306 | DNSLastUpdateCacheFile="dnscachelastupdate.txt" |
307 | |
308 | |
309 | # You can specify specific IP addresses that should NOT be looked up in DNS. |
310 | # This option is used only if DNSLookup=1. |
311 | # Note: Use space between each value. |
312 | # Note: You can use regular expression values writing value with REGEX[value]. |
313 | # Change : Effective for new updates only |
314 | # Example: "123.123.123.123 REGEX[^192\.168\.]" |
315 | # Default: "" |
316 | # |
317 | SkipDNSLookupFor="" |
318 | |
319 | |
320 | # The following two parameters allow you to protect a config file from being |
321 | # read by AWStats when called from a browser if web user has not been |
322 | # authenticated. Your AWStats program must be in a web protected "realm" (With |
323 | # Apache, you can use .htaccess files to do so. With other web servers, see |
324 | # your server setup manual). |
325 | # Change : Effective immediatly |
326 | # Possible values: 0 or 1 |
327 | # Default: 0 |
328 | # |
329 | AllowAccessFromWebToAuthenticatedUsersOnly=0 |
330 | |
331 | |
332 | # This parameter gives the list of all authorized authenticated users to view |
333 | # statistics for this domain/config file. This parameter is used only if |
334 | # AllowAccessFromWebToAuthenticatedUsersOnly is set to 1. |
335 | # Change : Effective immediatly |
336 | # Example: "user1 user2" |
337 | # Example: "__REMOTE_USER__" |
338 | # Default: "" |
339 | # |
340 | AllowAccessFromWebToFollowingAuthenticatedUsers="" |
341 | |
342 | |
343 | # When this parameter is defined to something, the IP address of the user that |
344 | # reads its statistics from a browser (when AWStats is used as a CGI) is |
345 | # checked and must match one of the IP address values or ranges. |
346 | # Change : Effective immediatly |
347 | # Example: "127.0.0.1 123.123.123.1-123.123.123.255" |
348 | # Default: "" |
349 | # |
350 | AllowAccessFromWebToFollowingIPAddresses="" |
351 | |
352 | |
353 | # If the "DirData" directory (see above) does not exist, AWStats return an |
354 | # error. However, you can ask AWStats to create it. |
355 | # This option can be used by some Web Hosting Providers that has defined a |
356 | # dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and |
357 | # don't want to have to create a new directory each time they add a new user. |
358 | # Change : Effective immediatly |
359 | # Possible values: 0 or 1 |
360 | # Default: 0 |
361 | # |
362 | CreateDirDataIfNotExists=0 |
363 | |
364 | |
365 | # You can choose in which format the Awstats history database is saved. |
366 | # Note: Using "xml" format make AWStats building database files three times |
367 | # larger than using "text" format. |
368 | # Change : Database format is switched after next update |
369 | # Possible values: text or xml |
370 | # Default: text |
371 | # |
372 | BuildHistoryFormat=text |
373 | |
374 | |
375 | # If you prefer having the report output pages be built as XML compliant pages |
376 | # instead of simple HTML pages, you can set this to 'xhtml' (May not work |
377 | # properly with old browsers). |
378 | # Change : Effective immediatly |
379 | # Possible values: html or xhtml |
380 | # Default: html |
381 | # |
382 | BuildReportFormat=html |
383 | |
384 | |
385 | # AWStats databases can be updated from command line of from a browser (when |
386 | # used as a cgi program). So AWStats database files need write permission |
387 | # for both command line user and default web server user (nobody for Unix, |
388 | # IUSR_xxx for IIS/Windows,...). |
389 | # To avoid permission problems between update process (run by an admin user) |
390 | # and CGI process (ran by a low level user), AWStats can save its database |
391 | # files with read and write permissions for everyone. |
392 | # By default, AWStats keeps default user permissions on updated files. If you |
393 | # set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1. |
394 | # Change : Effective for new updates only |
395 | # Possible values: 0 or 1 |
396 | # Default: 0 |
397 | # |
398 | SaveDatabaseFilesWithPermissionsForEveryone=0 |
399 | |
400 | |
401 | # AWStats can purge log file, after analyzing it. Note that AWStats is able |
402 | # to detect new lines in a log file, to process only them, so you can launch |
403 | # AWStats as often as you want, even with this parameter to 0. |
404 | # With 0, no purge is made, so you must use a scheduled task or a web server |
405 | # that make this purge frequently. |
406 | # With 1, the purge of the log file is made each time AWStats update is run. |
407 | # This parameter doesn't work with IIS (This web server doesn't let its log |
408 | # file to be purged). |
409 | # Change : Effective for new updates only |
410 | # Possible values: 0 or 1 |
411 | # Default: 0 |
412 | # |
413 | PurgeLogFile=0 |
414 | |
415 | |
416 | # When PurgeLogFile is setup to 1, AWStats will clean your log file after |
417 | # processing it. You can however keep an archive file of all processed log |
418 | # records by setting this parameter (For example if you want to use another |
419 | # log analyzer). The archived log file is saved in "DirData" with name |
420 | # awstats_archive.configname[.suffix].log |
421 | # This parameter is not used if PurgeLogFile=0 |
422 | # Change : Effective for new updates only |
423 | # Possible values: 0, 1, or tags (See LogFile parameter) for suffix |
424 | # Example: 1 |
425 | # Example: %YYYY%MM%DD |
426 | # Default: 0 |
427 | # |
428 | ArchiveLogRecords=0 |
429 | |
430 | |
431 | # Each time you run the update process, AWStats overwrites the 'historic file' |
432 | # for the month (awstatsMMYYYY[.*].txt) with the updated one. |
433 | # When write errors occurs (IO, disk full,...), this historic file can be |
434 | # corrupted and must be deleted. Because this file contains information of all |
435 | # past processed log files, you will loose old stats if removed. So you can |
436 | # ask AWStats to save last non corrupted file in a .bak file. This file is |
437 | # stored in "DirData" directory with other 'historic files'. |
438 | # Change : Effective for new updates only |
439 | # Possible values: 0 or 1 |
440 | # Default: 0 |
441 | # |
442 | KeepBackupOfHistoricFiles=0 |
443 | |
444 | |
445 | # Default index page name for your web server. |
446 | # Change : Effective for new updates only |
447 | # Example: "index.php index.html default.html" |
448 | # Default: "index.php index.html" |
449 | # |
450 | DefaultFile="index.php index.html" |
451 | |
452 | |
453 | # Do not include access from clients that match following criteria. |
454 | # If your log file contains IP addresses in host field, you must enter here |
455 | # matching IP addresses criteria. |
456 | # If DNS lookup is already done in your log file, you must enter here hostname |
457 | # criteria, else enter ip address criteria. |
458 | # The opposite parameter of "SkipHosts" is "OnlyHosts". |
459 | # Note: Use space between each value. This parameter is not case sensitive. |
460 | # Note: You can use regular expression values writing value with REGEX[value]. |
461 | # Change : Effective for new updates only |
462 | # Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]" |
463 | # Example: "localhost REGEX[^.*\.localdomain$]" |
464 | # Default: "" |
465 | # |
466 | SkipHosts="" |
467 | |
468 | |
469 | # Do not include access from clients with a user agent that match following |
470 | # criteria. If you want to exclude a robot, you should update the robots.pm |
471 | # file instead of this parameter. |
472 | # The opposite parameter of "SkipUserAgents" is "OnlyUserAgents". |
473 | # Note: Use space between each value. This parameter is not case sensitive. |
474 | # Note: You can use regular expression values writing value with REGEX[value]. |
475 | # Change : Effective for new updates only |
476 | # Example: "konqueror REGEX[ua_test_v\d\.\d]" |
477 | # Default: "" |
478 | # |
479 | SkipUserAgents="" |
480 | |
481 | |
482 | # Use SkipFiles to ignore access to URLs that match one of following entries. |
483 | # You can enter a list of not important URLs (like framed menus, hidden pages, |
484 | # etc...) to exclude them from statistics. You must enter here exact relative |
485 | # URL as found in log file, or a matching REGEX value. Check apply on URL with |
486 | # all its query paramaters. |
487 | # For example, to ignore /badpage.php, just add "/badpage.php". To ignore all |
488 | # pages in a particular directory, add "REGEX[^\/directorytoexclude]". |
489 | # The opposite parameter of "SkipFiles" is "OnlyFiles". |
490 | # Note: Use space between each value. This parameter is or not case sensitive |
491 | # depending on URLNotCaseSensitive parameter. |
492 | # Note: You can use regular expression values writing value with REGEX[value]. |
493 | # Change : Effective for new updates only |
494 | # Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]" |
495 | # Default: "" |
496 | # |
497 | SkipFiles="" |
498 | |
499 | |
500 | # Use SkipReferrersBlackList if you want to exclude records coming from a SPAM |
501 | # referrer. Parameter must receive a local file name containing rules applied |
502 | # on referrer field. If parameter is empty, no filter is applied. |
503 | # An example of such a file is available in lib/blacklist.txt |
504 | # Change : Effective for new updates only |
505 | # Example: "/mylibpath/blacklist.txt" |
506 | # Default: "" |
507 | # |
508 | # WARNING!! Using this feature make AWStats running very slower (5 times slower |
509 | # with black list file provided with AWStats ! |
510 | # |
511 | SkipReferrersBlackList="" |
512 | |
513 | |
514 | # Include in stats, only accesses from hosts that match one of following |
515 | # entries. For example, if you want AWStats to filter access to keep only |
516 | # stats for visits from particular hosts, you can add those host names in |
517 | # this parameter. |
518 | # If DNS lookup is already done in your log file, you must enter here hostname |
519 | # criteria, else enter ip address criteria. |
520 | # The opposite parameter of "OnlyHosts" is "SkipHosts". |
521 | # Note: Use space between each value. This parameter is not case sensitive. |
522 | # Note: You can use regular expression values writing value with REGEX[value]. |
523 | # Change : Effective for new updates only |
524 | # Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]" |
525 | # Default: "" |
526 | # |
527 | OnlyHosts="" |
528 | |
529 | |
530 | # Include in stats, only accesses from user agent that match one of following |
531 | # entries. For example, if you want AWStats to filter access to keep only |
532 | # stats for visits from particular browsers, you can add their user agents |
533 | # string in this parameter. |
534 | # The opposite parameter of "OnlyUserAgents" is "SkipUserAgents". |
535 | # Note: Use space between each value. This parameter is not case sensitive. |
536 | # Note: You can use regular expression values writing value with REGEX[value]. |
537 | # Change : Effective for new updates only |
538 | # Example: "msie" |
539 | # Default: "" |
540 | # |
541 | OnlyUserAgents="" |
542 | |
543 | |
544 | # Include in stats, only accesses from authenticated users that match one of |
545 | # following entries. For example, if you want AWStats to filter access to keep |
546 | # only stats for authenticated users, you can add those users names in |
547 | # this parameter. Useful for statistics for per user ftp logs. |
548 | # Note: Use space between each value. This parameter is not case sensitive. |
549 | # Note: You can use regular expression values writing value with REGEX[value]. |
550 | # Change : Effective for new updates only |
551 | # Example: "john bob REGEX[^testusers]" |
552 | # Default: "" |
553 | # |
554 | OnlyUsers="" |
555 | |
556 | |
557 | # Include in stats, only accesses to URLs that match one of following entries. |
558 | # For example, if you want AWStats to filter access to keep only stats that |
559 | # match a particular string, like a particular directory, you can add this |
560 | # directory name in this parameter. |
561 | # The opposite parameter of "OnlyFiles" is "SkipFiles". |
562 | # Note: Use space between each value. This parameter is or not case sensitive |
563 | # depending on URLNotCaseSensitive parameter. |
564 | # Note: You can use regular expression values writing value with REGEX[value]. |
565 | # Change : Effective for new updates only |
566 | # Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]" |
567 | # Default: "" |
568 | # |
569 | OnlyFiles="" |
570 | |
571 | |
572 | # Add here a list of kind of url (file extension) that must be counted as |
573 | # "Hit only" and not as a "Hit" and "Page/Download". You can set here all |
574 | # image extensions as they are hit downloaded that must be counted but they |
575 | # are not viewed pages. URLs with such extensions are not included in the TOP |
576 | # Pages/URL report. |
577 | # Note: If you want to exclude particular URLs from stats (No Pages and no |
578 | # Hits reported), you must use SkipFiles parameter. |
579 | # Change : Effective for new updates only |
580 | # Example: "css js class gif jpg jpeg png bmp ico rss xml swf zip arj rar gz z bz2 wav mp3 wma mpg avi" |
581 | # Example: "" |
582 | # Default: "css js class gif jpg jpeg png bmp ico rss xml swf" |
583 | # |
584 | NotPageList="css js class gif jpg jpeg png bmp ico rss xml swf" |
585 | |
586 | |
587 | # By default, AWStats considers that records found in web log file are |
588 | # successful hits if HTTP code returned by server is a valid HTTP code (200 |
589 | # and 304). Any other code are reported in HTTP status chart. |
590 | # Note that HTTP 'control codes', like redirection (302, 305) are not added by |
591 | # default in this list as they are not pages seen by a visitor but are |
592 | # protocol exchange codes to tell the browser to ask another page. Because |
593 | # this other page will be counted and seen with a 200 or 304 code, if you |
594 | # add such codes, you will have 2 pages viewed reported for only one in facts. |
595 | # Change : Effective for new updates only |
596 | # Example: "200 304 302 305" |
597 | # Default: "200 304" |
598 | # |
599 | ValidHTTPCodes="200 304" |
600 | |
601 | |
602 | # By default, AWStats considers that records found in mail log file are |
603 | # successful mail transfers if field that represent return code in analyzed |
604 | # log file match values defined by this parameter. |
605 | # Change : Effective for new updates only |
606 | # Example: "1 250 200" |
607 | # Default: "1 250" |
608 | # |
609 | ValidSMTPCodes="1 250" |
610 | |
611 | |
612 | # Some web servers on some Operating systems (IIS-Windows) consider that a |
613 | # login with same value but different case are the same login. To tell AWStats |
614 | # to also consider them as one, set this parameter to 1. |
615 | # Change : Effective for new updates only |
616 | # Possible values: 0 or 1 |
617 | # Default: 0 |
618 | # |
619 | AuthenticatedUsersNotCaseSensitive=0 |
620 | |
621 | |
622 | # Some web servers on some Operating systems (IIS-Windows) considers that two |
623 | # URLs with same value but different case are the same URL. To tell AWStats to |
624 | # also considers them as one, set this parameter to 1. |
625 | # Change : Effective for new updates only |
626 | # Possible values: 0 or 1 |
627 | # Default: 0 |
628 | # |
629 | URLNotCaseSensitive=0 |
630 | |
631 | |
632 | # Keep or remove the anchor string you can find in some URLs. |
633 | # Change : Effective for new updates only |
634 | # Possible values: 0 or 1 |
635 | # Default: 0 |
636 | # |
637 | URLWithAnchor=0 |
638 | |
639 | |
640 | # In URL links, "?" char is used to add parameter's list in URLs. Syntax is: |
641 | # /mypage.html?param1=value1¶m2=value2 |
642 | # However, some servers/sites use also other chars to isolate dynamic part of |
643 | # their URLs. You can complete this list with all such characters. |
644 | # Change : Effective for new updates only |
645 | # Example: "?;," |
646 | # Default: "?;" |
647 | # |
648 | URLQuerySeparators="?;" |
649 | |
650 | |
651 | # Keep or remove the query string to the URL in the statistics for individual |
652 | # pages. This is primarily used to differentiate between the URLs of dynamic |
653 | # pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two |
654 | # different pages. |
655 | # Warning, when set to 1, memory required to run AWStats is dramatically |
656 | # increased if you have a lot of changing URLs (for example URLs with a random |
657 | # id inside). Such web sites should not set this option to 1 or use seriously |
658 | # the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually |
659 | # URLWithQueryWithoutFollowingParameters). |
660 | # Change : Effective for new updates only |
661 | # Possible values: |
662 | # 0 - URLs are cleaned from the query string (ie: "/mypage.html") |
663 | # 1 - Full URL with query string is used (ie: "/mypage.html?p=x&q=y") |
664 | # Default: 0 |
665 | # |
666 | URLWithQuery=0 |
667 | |
668 | |
669 | # When URLWithQuery is on, you will get the full URL with all parameters in |
670 | # URL reports. But among thoose parameters, sometimes you don't need a |
671 | # particular parameter because it does not identify the page or because it's |
672 | # a random ID changing for each access even if URL points to same page. In |
673 | # such cases, it is higly recommanded to ask AWStats to keep only parameters |
674 | # you need (if you know them) before counting, manipulating and storing URL. |
675 | # Enter here list of wanted parameters. For example, with "param", one hit on |
676 | # /mypage.cgi?param=abc&id=Yo4UomP9d and /mypage.cgi?param=abc&id=Mu8fdxl3r |
677 | # will be reported as 2 hits on /mypage.cgi?param=abc |
678 | # This parameter is not used when URLWithQuery is 0 and can't be used with |
679 | # URLWithQueryWithoutFollowingParameters. |
680 | # Change : Effective for new updates only |
681 | # Example: "param" |
682 | # Default: "" |
683 | # |
684 | URLWithQueryWithOnlyFollowingParameters="" |
685 | |
686 | |
687 | # When URLWithQuery is on, you will get the full URL with all parameters in |
688 | # URL reports. But among thoose parameters, sometimes you don't need a |
689 | # particular parameter because it does not identify the page or because it's |
690 | # a random ID changing for each access even if URL points to same page. In |
691 | # such cases, it is higly recommanded to ask AWStats to remove such parameters |
692 | # from the URL before counting, manipulating and storing URL. Enter here list |
693 | # of all non wanted parameters. For example if you enter "id", one hit on |
694 | # /mypage.cgi?param=abc&id=Yo4UomP9d and /mypage.cgi?param=abc&id=Mu8fdxl3r |
695 | # will be reported as 2 hits on /mypage.cgi?param=abc |
696 | # This parameter is not used when URLWithQuery is 0 and can't be used with |
697 | # URLWithQueryWithOnlyFollowingParameters. |
698 | # Change : Effective for new updates only |
699 | # Example: "PHPSESSID jsessionid" |
700 | # Default: "" |
701 | # |
702 | URLWithQueryWithoutFollowingParameters="" |
703 | |
704 | |
705 | # Keep or remove the query string to the referrer URL in the statistics for |
706 | # external referrer pages. This is used to differentiate between the URLs of |
707 | # dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y |
708 | # are counted as two different referrer pages. |
709 | # Change : Effective for new updates only |
710 | # Possible values: |
711 | # 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html") |
712 | # 1 - Full URL with query string is used (ie: "/mypage.html?p=x&q=y") |
713 | # Default: 0 |
714 | # |
715 | URLReferrerWithQuery=0 |
716 | |
717 | |
718 | # AWStats can detect setup problems or show you important informations to have |
719 | # a better use. Keep this to 1, except if AWStats says you can change it. |
720 | # Change : Effective immediatly |
721 | # Possible values: 0 or 1 |
722 | # Default: 1 |
723 | # |
724 | WarningMessages=1 |
725 | |
726 | |
727 | # When an error occurs, AWStats outputs a message related to errors. If you |
728 | # want (in most cases for security reasons) to have no error messages, you |
729 | # can set this parameter to your personalized generic message. |
730 | # Change : Effective immediatly |
731 | # Example: "An error occurred. Contact your Administrator" |
732 | # Default: "" |
733 | # |
734 | ErrorMessages="" |
735 | |
736 | |
737 | # AWStat can be run with debug=x parameter to output various informations |
738 | # to help in debugging or solving troubles. If you want to allow this (not |
739 | # enabled by default for security reasons), set this parameter to 0. |
740 | # Change : Effective immediatly |
741 | # Possible values: 0 or 1 |
742 | # Default: 0 |
743 | # |
744 | DebugMessages=0 |
745 | |
746 | |
747 | # To help you to detect if your log format is good, AWStats reports an error |
748 | # if all the first NbOfLinesForCorruptedLog lines have a format that does not |
749 | # match the LogFormat parameter. |
750 | # However, some worm virus attack on your web server can result in a very high |
751 | # number of corrupted lines in your log. So if you experience awstats stop |
752 | # because of bad virus records at the beginning of your log file, you can |
753 | # increase this parameter (very rare). |
754 | # Change : Effective for new updates only |
755 | # Default: 50 |
756 | # |
757 | NbOfLinesForCorruptedLog=50 |
758 | |
759 | |
760 | # For some particular integration needs, you may want to have CGI links to |
761 | # point to another script than awstats.pl. |
762 | # Use the name of this script in WrapperScript parameter. |
763 | # Change : Effective immediatly |
764 | # Example: "awstatslauncher.pl" |
765 | # Example: "awstatswrapper.cgi?key=123" |
766 | # Default: "" |
767 | # |
768 | WrapperScript="" |
769 | |
770 | |
771 | # DecodeUA must be set to 1 if you use Roxen web server. This server converts |
772 | # all spaces in user agent field into %20. This make the AWStats robots, OS |
773 | # and browsers detection fail in some cases. Just change it to 1 if and only |
774 | # if your web server is Roxen. |
775 | # Change : Effective for new updates only |
776 | # Possible values: 0 or 1 |
777 | # Default: 0 |
778 | # |
779 | DecodeUA=0 |
780 | |
781 | |
782 | # MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous |
783 | # things, that can not be tracked on other way, like: |
784 | # - Javascript disabled |
785 | # - Java enabled |
786 | # - Screen size |
787 | # - Color depth |
788 | # - Macromedia Director plugin |
789 | # - Macromedia Shockwave plugin |
790 | # - Realplayer G2 plugin |
791 | # - QuickTime plugin |
792 | # - Mediaplayer plugin |
793 | # - Acrobat PDF plugin |
794 | # To enable all these features, you must copy the awstats_misc_tracker.js file |
795 | # into a /js/ directory stored in your web document root and add the following |
796 | # HTML code at the end of your index page (but before </BODY>) : |
797 | # |
798 | # <script type="text/javascript" src="/js/awstats_misc_tracker.js"></script> |
799 | # <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript> |
800 | # |
801 | # If code is not added in index page, all those detection capabilities will be |
802 | # disabled. You must also check that ShowScreenSizeStats and ShowMiscStats |
803 | # parameters are set to 1 to make results appear in AWStats report page. |
804 | # If you want to use another directory than /js/, you must also change the |
805 | # awstatsmisctrackerurl variable into the awstats_misc_tracker.js file. |
806 | # Change : Effective for new updates only. |
807 | # Possible value: URL of javascript tracker file added in your HTML code. |
808 | # Default: "/js/awstats_misc_tracker.js" |
809 | # |
810 | MiscTrackerUrl="/js/awstats_misc_tracker.js" |
811 | |
812 | |
813 | |
814 | #----------------------------------------------------------------------------- |
815 | # OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features) |
816 | #----------------------------------------------------------------------------- |
817 | |
818 | # The following values allow you to define accuracy of AWStats entities |
819 | # (robots, browsers, os, referers, file types) detection. |
820 | # It might be a good idea for large web sites or ISP that provides AWStats to |
821 | # high number of customers, to set this parameter to 1 (or 0), instead of 2. |
822 | # Possible values: |
823 | # 0 = No detection, |
824 | # 1 = Medium/Standard detection |
825 | # 2 = Full detection |
826 | # Change : Effective for new updates only |
827 | # Note : LevelForBrowsersDetection can also accept value "allphones". This |
828 | # enable detailed detection of phone/pda browsers. |
829 | # Default: 2 (0 for LevelForWormsDetection) |
830 | # |
831 | LevelForBrowsersDetection=2 # 0 disables Browsers detection. |
832 | # 2 reduces AWStats speed by 2% |
833 | # allphones reduces AWStats speed by 5% |
834 | LevelForOSDetection=2 # 0 disables OS detection. |
835 | # 2 reduces AWStats speed by 3% |
836 | LevelForRefererAnalyze=2 # 0 disables Origin detection. |
837 | # 2 reduces AWStats speed by 14% |
838 | LevelForRobotsDetection=2 # 0 disables Robots detection. |
839 | # 2 reduces AWStats speed by 2.5% |
840 | LevelForSearchEnginesDetection=2 # 0 disables Search engines detection. |
841 | # 2 reduces AWStats speed by 9% |
842 | LevelForKeywordsDetection=2 # 0 disables Keyphrases/Keywords detection. |
843 | # 2 reduces AWStats speed by 1% |
844 | LevelForFileTypesDetection=2 # 0 disables File types detection. |
845 | # 2 reduces AWStats speed by 1% |
846 | LevelForWormsDetection=0 # 0 disables Worms detection. |
847 | # 2 reduces AWStats speed by 15% |
848 | |
849 | |
850 | |
851 | #----------------------------------------------------------------------------- |
852 | # OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features) |
853 | #----------------------------------------------------------------------------- |
854 | |
855 | # When you use AWStats as a CGI, you can have the reports shown in HTML frames. |
856 | # Frames are only available for report viewed dynamically. When you build |
857 | # pages from command line, this option is not used and no frames are built. |
858 | # Possible values: 0 or 1 |
859 | # Default: 1 |
860 | # |
861 | UseFramesWhenCGI=1 |
862 | |
863 | |
864 | # This parameter asks your browser to open detailed reports into a different |
865 | # window than the main page. |
866 | # Possible values: |
867 | # 0 - Open all in same browser window |
868 | # 1 - Open detailed reports in another window except if using frames |
869 | # 2 - Open always in a different window even if reports are framed |
870 | # Default: 1 |
871 | # |
872 | DetailedReportsOnNewWindows=1 |
873 | |
874 | |
875 | # You can add, in the HTML report page, a cache lifetime (in seconds) that |
876 | # will be returned to the browser in HTTP header answer by server. |
877 | # This parameter is not used when reports are built with -staticlinks option. |
878 | # Example: 3600 |
879 | # Default: 0 |
880 | # |
881 | Expires=0 |
882 | |
883 | |
884 | # To avoid too large web pages, you can ask AWStats to limit number of rows of |
885 | # all reported charts to this number when no other limits apply. |
886 | # Default: 1000 |
887 | # |
888 | MaxRowsInHTMLOutput=1000 |
889 | |
890 | |
891 | # Set your primary language (ISO-639-1 language codes). |
892 | # Possible values: |
893 | # Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca, |
894 | # Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz, |
895 | # Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi, |
896 | # French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu, |
897 | # Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko, |
898 | # Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl, |
899 | # Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru, |
900 | # Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr, |
901 | # Ukrainian=ua, Welsh=cy. |
902 | # First available language accepted by browser=auto |
903 | # Default: "auto" |
904 | # |
905 | Lang="auto" |
906 | |
907 | |
908 | # Set the location of language files. |
909 | # Example: "/usr/share/awstats/lang" |
910 | # Default: "./lang" (means lang directory is in same location than awstats.pl) |
911 | # |
912 | DirLang="./lang" |
913 | |
914 | |
915 | # Show menu header with reports' links |
916 | # Possible values: 0 or 1 |
917 | # Default: 1 |
918 | # |
919 | ShowMenu=1 |
920 | |
921 | |
922 | # You choose here which reports you want to see in the main page and what you |
923 | # want to see in those reports. |
924 | # Possible values: |
925 | # 0 - Report is not shown at all |
926 | # 1 - Report is shown in main page with an entry in menu and default columns |
927 | # XYZ - Report shows column informations defined by code X,Y,Z... |
928 | # X,Y,Z... are code letters among the following: |
929 | # U = Unique visitors |
930 | # V = Visits |
931 | # P = Number of pages |
932 | # H = Number of hits (or mails) |
933 | # B = Bandwith (or total mail size for mail logs) |
934 | # L = Last access date |
935 | # E = Entry pages |
936 | # X = Exit pages |
937 | # C = Web compression (mod_gzip,mod_deflate) |
938 | # M = Average mail size (mail logs) |
939 | # |
940 | |
941 | # Show monthly summary |
942 | # Context: Web, Streaming, Mail, Ftp |
943 | # Default: UVPHB, Possible column codes: UVPHB |
944 | ShowSummary=UVPHB |
945 | |
946 | # Show monthly chart |
947 | # Context: Web, Streaming, Mail, Ftp |
948 | # Default: UVPHB, Possible column codes: UVPHB |
949 | ShowMonthStats=UVPHB |
950 | |
951 | # Show days of month chart |
952 | # Context: Web, Streaming, Mail, Ftp |
953 | # Default: VPHB, Possible column codes: VPHB |
954 | ShowDaysOfMonthStats=VPHB |
955 | |
956 | # Show days of week chart |
957 | # Context: Web, Streaming, Mail, Ftp |
958 | # Default: PHB, Possible column codes: PHB |
959 | ShowDaysOfWeekStats=PHB |
960 | |
961 | # Show hourly chart |
962 | # Context: Web, Streaming, Mail, Ftp |
963 | # Default: PHB, Possible column codes: PHB |
964 | ShowHoursStats=PHB |
965 | |
966 | # Show domains/country chart |
967 | # Context: Web, Streaming, Mail, Ftp |
968 | # Default: PHB, Possible column codes: PHB |
969 | ShowDomainsStats=PHB |
970 | |
971 | # Show hosts chart |
972 | # Context: Web, Streaming, Mail, Ftp |
973 | # Default: PHBL, Possible column codes: PHBL |
974 | ShowHostsStats=PHBL |
975 | |
976 | # Show authenticated users chart |
977 | # Context: Web, Streaming, Ftp |
978 | # Default: 0, Possible column codes: PHBL |
979 | ShowAuthenticatedUsers=0 |
980 | |
981 | # Show robots chart |
982 | # Context: Web, Streaming |
983 | # Default: HBL, Possible column codes: HBL |
984 | ShowRobotsStats=HBL |
985 | |
986 | # Show worms chart |
987 | # Context: Web, Streaming |
988 | # Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL |
989 | ShowWormsStats=0 |
990 | |
991 | # Show email senders chart (For use when analyzing mail log files) |
992 | # Context: Mail |
993 | # Default: 0, Possible column codes: HBML |
994 | ShowEMailSenders=0 |
995 | |
996 | # Show email receivers chart (For use when analyzing mail log files) |
997 | # Context: Mail |
998 | # Default: 0, Possible column codes: HBML |
999 | ShowEMailReceivers=0 |
1000 | |
1001 | # Show session chart |
1002 | # Context: Web, Streaming, Ftp |
1003 | # Default: 1, Possible column codes: None |
1004 | ShowSessionsStats=1 |
1005 | |
1006 | # Show pages-url chart. |
1007 | # Context: Web, Streaming, Ftp |
1008 | # Default: PBEX, Possible column codes: PBEX |
1009 | ShowPagesStats=PBEX |
1010 | |
1011 | # Show file types chart. |
1012 | # Context: Web, Streaming, Ftp |
1013 | # Default: HB, Possible column codes: HBC |
1014 | ShowFileTypesStats=HB |
1015 | |
1016 | # Show file size chart (Not yet available) |
1017 | # Context: Web, Streaming, Mail, Ftp |
1018 | # Default: 1, Possible column codes: None |
1019 | ShowFileSizesStats=0 |
1020 | |
1021 | # Show downloads chart. |
1022 | # Context: Web, Streaming, Ftp |
1023 | # Default: HB, Possible column codes: HB |
1024 | ShowDownloadsStats=HB |
1025 | |
1026 | # Show operating systems chart |
1027 | # Context: Web, Streaming, Ftp |
1028 | # Default: 1, Possible column codes: None |
1029 | ShowOSStats=1 |
1030 | |
1031 | # Show browsers chart |
1032 | # Context: Web, Streaming |
1033 | # Default: 1, Possible column codes: None |
1034 | ShowBrowsersStats=1 |
1035 | |
1036 | # Show screen size chart |
1037 | # Context: Web, Streaming |
1038 | # Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None |
1039 | ShowScreenSizeStats=0 |
1040 | |
1041 | # Show origin chart |
1042 | # Context: Web, Streaming |
1043 | # Default: PH, Possible column codes: PH |
1044 | ShowOriginStats=PH |
1045 | |
1046 | # Show keyphrases chart |
1047 | # Context: Web, Streaming |
1048 | # Default: 1, Possible column codes: None |
1049 | ShowKeyphrasesStats=1 |
1050 | |
1051 | # Show keywords chart |
1052 | # Context: Web, Streaming |
1053 | # Default: 1, Possible column codes: None |
1054 | ShowKeywordsStats=1 |
1055 | |
1056 | # Show misc chart |
1057 | # Context: Web, Streaming |
1058 | # Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp |
1059 | ShowMiscStats=a |
1060 | |
1061 | # Show http errors chart |
1062 | # Context: Web, Streaming |
1063 | # Default: 1, Possible column codes: None |
1064 | ShowHTTPErrorsStats=1 |
1065 | |
1066 | # Show smtp errors chart (For use when analyzing mail log files) |
1067 | # Context: Mail |
1068 | # Default: 0, Possible column codes: None |
1069 | ShowSMTPErrorsStats=0 |
1070 | |
1071 | # Show the cluster report (Your LogFormat must contains the %cluster tag) |
1072 | # Context: Web, Streaming, Ftp |
1073 | # Default: 0, Possible column codes: PHB |
1074 | ShowClusterStats=0 |
1075 | |
1076 | |
1077 | # Some graphical reports are followed by the data array of values. |
1078 | # If you don't want this array (to reduce the report size for example), you |
1079 | # can set thoose options to 0. |
1080 | # Possible values: 0 or 1 |
1081 | # Default: 1 |
1082 | # |
1083 | # Data array values for the ShowMonthStats report |
1084 | AddDataArrayMonthStats=1 |
1085 | # Data array values for the ShowDaysOfMonthStats report |
1086 | AddDataArrayShowDaysOfMonthStats=1 |
1087 | # Data array values for the ShowDaysOfWeekStats report |
1088 | AddDataArrayShowDaysOfWeekStats=1 |
1089 | # Data array values for the ShowHoursStats report |
1090 | AddDataArrayShowHoursStats=1 |
1091 | |
1092 | |
1093 | # In the Origin chart, you have stats on where your hits came from. You can |
1094 | # include hits on pages that come from pages of same sites in this chart. |
1095 | # Possible values: 0 or 1 |
1096 | # Default: 0 |
1097 | # |
1098 | IncludeInternalLinksInOriginSection=0 |
1099 | |
1100 | |
1101 | # The following parameters can be used to choose the maximum number of lines |
1102 | # shown for the particular following reports. |
1103 | # |
1104 | # Stats by countries/domains |
1105 | MaxNbOfDomain = 10 |
1106 | MinHitDomain = 1 |
1107 | # Stats by hosts |
1108 | MaxNbOfHostsShown = 10 |
1109 | MinHitHost = 1 |
1110 | # Stats by authenticated users |
1111 | MaxNbOfLoginShown = 10 |
1112 | MinHitLogin = 1 |
1113 | # Stats by robots |
1114 | MaxNbOfRobotShown = 10 |
1115 | MinHitRobot = 1 |
1116 | # Stats for Downloads |
1117 | MaxNbOfDownloadsShown = 10 |
1118 | MinHitDownloads = 1 |
1119 | # Stats by pages |
1120 | MaxNbOfPageShown = 10 |
1121 | MinHitFile = 1 |
1122 | # Stats by OS |
1123 | MaxNbOfOsShown = 10 |
1124 | MinHitOs = 1 |
1125 | # Stats by browsers |
1126 | MaxNbOfBrowsersShown = 10 |
1127 | MinHitBrowser = 1 |
1128 | # Stats by screen size |
1129 | MaxNbOfScreenSizesShown = 5 |
1130 | MinHitScreenSize = 1 |
1131 | # Stats by window size (following 2 parameters are not yet used) |
1132 | MaxNbOfWindowSizesShown = 5 |
1133 | MinHitWindowSize = 1 |
1134 | # Stats by referers |
1135 | MaxNbOfRefererShown = 10 |
1136 | MinHitRefer = 1 |
1137 | # Stats for keyphrases |
1138 | MaxNbOfKeyphrasesShown = 10 |
1139 | MinHitKeyphrase = 1 |
1140 | # Stats for keywords |
1141 | MaxNbOfKeywordsShown = 10 |
1142 | MinHitKeyword = 1 |
1143 | # Stats for sender or receiver emails |
1144 | MaxNbOfEMailsShown = 20 |
1145 | MinHitEMail = 1 |
1146 | |
1147 | |
1148 | # Choose if you want the week report to start on sunday or monday |
1149 | # Possible values: |
1150 | # 0 - Week starts on sunday |
1151 | # 1 - Week starts on monday |
1152 | # Default: 1 |
1153 | # |
1154 | FirstDayOfWeek=1 |
1155 | |
1156 | |
1157 | # List of visible flags that link to other language translations. |
1158 | # See Lang parameter for list of allowed flag/language codes. |
1159 | # If you don't want any flag link, set ShowFlagLinks to "". |
1160 | # This parameter is used only if ShowMenu parameter is set to 1. |
1161 | # Possible values: "" or "language_codes_separated_by_space" |
1162 | # Example: "en es fr nl de" |
1163 | # Default: "" |
1164 | # |
1165 | ShowFlagLinks="" |
1166 | |
1167 | |
1168 | # Each URL, shown in stats report views, are links you can click. |
1169 | # Possible values: 0 or 1 |
1170 | # Default: 1 |
1171 | # |
1172 | ShowLinksOnUrl=1 |
1173 | |
1174 | |
1175 | # When AWStats builds HTML links in its report pages, it starts those links |
1176 | # with "http://". However some links might be HTTPS links, so you can enter |
1177 | # here the root of all your HTTPS links. If all your site is a SSL web site, |
1178 | # just enter "/". |
1179 | # This parameter is not used if ShowLinksOnUrl is 0. |
1180 | # Example: "/shopping" |
1181 | # Example: "/" |
1182 | # Default: "" |
1183 | # |
1184 | UseHTTPSLinkForUrl="" |
1185 | |
1186 | |
1187 | # Maximum length of URL part shown on stats page (number of characters). |
1188 | # This affects only URL visible text, links still work. |
1189 | # Default: 64 |
1190 | # |
1191 | MaxLengthOfShownURL=64 |
1192 | |
1193 | |
1194 | # You can enter HTML code that will be added at the top of AWStats reports. |
1195 | # Default: "" |
1196 | # |
1197 | HTMLHeadSection="" |
1198 | |
1199 | |
1200 | # You can enter HTML code that will be added at the end of AWStats reports. |
1201 | # Great to add advert ban. |
1202 | # Default: "" |
1203 | # |
1204 | HTMLEndSection="" |
1205 | |
1206 | |
1207 | # By default AWStats page contains meta tag robots=noindex,nofollow |
1208 | # If you want to have your statistics to be indexed, set this option to 1. |
1209 | # Default: 0 |
1210 | # |
1211 | MetaRobot=0 |
1212 | |
1213 | |
1214 | # You can set Logo and LogoLink to use your own logo. |
1215 | # Logo must be the name of image file (must be in $DirIcons/other directory). |
1216 | # LogoLink is the expected URL when clicking on Logo. |
1217 | # Default: "awstats_logo6.png" |
1218 | # |
1219 | Logo="awstats_logo6.png" |
1220 | LogoLink="http://awstats.sourceforge.net" |
1221 | |
1222 | |
1223 | # Value of maximum bar width/height for horizontal/vertical HTML graphics bars. |
1224 | # Default: 260/90 |
1225 | # |
1226 | BarWidth = 260 |
1227 | BarHeight = 90 |
1228 | |
1229 | |
1230 | # You can ask AWStats to use a particular CSS (Cascading Style Sheet) to |
1231 | # change its look. To create a style sheet, you can use samples provided with |
1232 | # AWStats in wwwroot/css directory. |
1233 | # Example: "/awstatscss/awstats_bw.css" |
1234 | # Example: "/css/awstats_bw.css" |
1235 | # Default: "" |
1236 | # |
1237 | StyleSheet="" |
1238 | |
1239 | |
1240 | # Those color parameters can be used (if StyleSheet parameter is not used) |
1241 | # to change AWStats look. |
1242 | # Example: color_name="RRGGBB" # RRGGBB is Red Green Blue components in Hex |
1243 | # |
1244 | color_Background="FFFFFF" # Background color for main page (Default = "FFFFFF") |
1245 | color_TableBGTitle="CCCCDD" # Background color for table title (Default = "CCCCDD") |
1246 | color_TableTitle="000000" # Table title font color (Default = "000000") |
1247 | color_TableBG="CCCCDD" # Background color for table (Default = "CCCCDD") |
1248 | color_TableRowTitle="FFFFFF" # Table row title font color (Default = "FFFFFF") |
1249 | color_TableBGRowTitle="ECECEC" # Background color for row title (Default = "ECECEC") |
1250 | color_TableBorder="ECECEC" # Table border color (Default = "ECECEC") |
1251 | color_text="000000" # Color of text (Default = "000000") |
1252 | color_textpercent="606060" # Color of text for percent values (Default = "606060") |
1253 | color_titletext="000000" # Color of text title within colored Title Rows (Default = "000000") |
1254 | color_weekend="EAEAEA" # Color for week-end days (Default = "EAEAEA") |
1255 | color_link="0011BB" # Color of HTML links (Default = "0011BB") |
1256 | color_hover="605040" # Color of HTML on-mouseover links (Default = "605040") |
1257 | color_u="FFAA66" # Background color for number of unique visitors (Default = "FFAA66") |
1258 | color_v="F4F090" # Background color for number of visites (Default = "F4F090") |
1259 | color_p="4477DD" # Background color for number of pages (Default = "4477DD") |
1260 | color_h="66DDEE" # Background color for number of hits (Default = "66DDEE") |
1261 | color_k="2EA495" # Background color for number of bytes (Default = "2EA495") |
1262 | color_s="8888DD" # Background color for number of search (Default = "8888DD") |
1263 | color_e="CEC2E8" # Background color for number of entry pages (Default = "CEC2E8") |
1264 | color_x="C1B2E2" # Background color for number of exit pages (Default = "C1B2E2") |
1265 | |
1266 | |
1267 | |
1268 | #----------------------------------------------------------------------------- |
1269 | # PLUGINS |
1270 | #----------------------------------------------------------------------------- |
1271 | |
1272 | # Add here all plugin files you want to load. |
1273 | # Plugin files must be .pm files stored in 'plugins' directory. |
1274 | # Uncomment LoadPlugin lines to enable a plugin after checking that perl |
1275 | # modules required by the plugin are installed. |
1276 | |
1277 | # PLUGIN: Tooltips |
1278 | # REQUIRED MODULES: None |
1279 | # PARAMETERS: None |
1280 | # DESCRIPTION: Add tooltips pop-up help boxes to HTML report pages. |
1281 | # NOTE: This will increased HTML report pages size, thus server load and bandwidth. |
1282 | # |
1283 | #LoadPlugin="tooltips" |
1284 | |
1285 | # PLUGIN: DecodeUTFKeys |
1286 | # REQUIRED MODULES: Encode and URI::Escape |
1287 | # PARAMETERS: None |
1288 | # DESCRIPTION: Allow AWStats to show correctly (in language charset) |
1289 | # keywords/keyphrases strings even if they were UTF8 coded by the |
1290 | # referer search engine. |
1291 | # |
1292 | #LoadPlugin="decodeutfkeys" |
1293 | |
1294 | # PLUGIN: IPv6 |
1295 | # PARAMETERS: None |
1296 | # REQUIRED MODULES: Net::IP and Net::DNS |
1297 | # DESCRIPTION: This plugin gives AWStats capability to make reverse DNS |
1298 | # lookup on IPv6 addresses. |
1299 | # |
1300 | #LoadPlugin="ipv6" |
1301 | |
1302 | # PLUGIN: HashFiles |
1303 | # REQUIRED MODULES: Storable |
1304 | # PARAMETERS: None |
1305 | # DESCRIPTION: AWStats DNS cache files are read/saved as native hash files. |
1306 | # This increases DNS cache files loading speed, above all for very large web sites. |
1307 | # |
1308 | #LoadPlugin="hashfiles" |
1309 | |
1310 | |
1311 | # PLUGIN: UserInfo |
1312 | # REQUIRED MODULES: None |
1313 | # PARAMETERS: None |
1314 | # DESCRIPTION: Add a text (Firtname, Lastname, Office Department, ...) in |
1315 | # authenticated user reports for each login value. |
1316 | # A text file called userinfo.myconfig.txt, with two fields (first is login, |
1317 | # second is text to show, separated by a tab char) must be created in DirData |
1318 | # directory. |
1319 | # |
1320 | #LoadPlugin="userinfo" |
1321 | |
1322 | # PLUGIN: HostInfo |
1323 | # REQUIRED MODULES: Net::XWhois |
1324 | # PARAMETERS: None |
1325 | # DESCRIPTION: Add a column into host chart with a link to open a popup window that shows |
1326 | # info on host (like whois records). |
1327 | # |
1328 | #LoadPlugin="hostinfo" |
1329 | |
1330 | # PLUGIN: ClusterInfo |
1331 | # REQUIRED MODULES: None |
1332 | # PARAMETERS: None |
1333 | # DESCRIPTION: Add a text (for example a full hostname) in cluster reports for each cluster |
1334 | # number. A text file called clusterinfo.myconfig.txt, with two fields (first is |
1335 | # cluster number, second is text to show) separated by a tab char. must be |
1336 | # created into DirData directory. |
1337 | # Note this plugin is useless if ShowClusterStats is set to 0 or if you don't |
1338 | # use a personalized log format that contains %cluster tag. |
1339 | # |
1340 | #LoadPlugin="clusterinfo" |
1341 | |
1342 | # PLUGIN: UrlAliases |
1343 | # REQUIRED MODULES: None |
1344 | # PARAMETERS: None |
1345 | # DESCRIPTION: Add a text (Page title, description...) in URL reports before URL value. |
1346 | # A text file called urlalias.myconfig.txt, with two fields (first is URL, |
1347 | # second is text to show, separated by a tab char) must be created into |
1348 | # DirData directory. |
1349 | # |
1350 | #LoadPlugin="urlalias" |
1351 | |
1352 | # PLUGIN: TimeHiRes |
1353 | # REQUIRED MODULES: Time::HiRes (if Perl < 5.8) |
1354 | # PARAMETERS: None |
1355 | # DESCRIPTION: Time reported by -showsteps option is in millisecond. For debug purpose. |
1356 | # |
1357 | #LoadPlugin="timehires" |
1358 | |
1359 | # PLUGIN: TimeZone |
1360 | # REQUIRED MODULES: Time::Local |
1361 | # PARAMETERS: [timezone offset] |
1362 | # DESCRIPTION: Allow AWStats to adjust time stamps for a different timezone |
1363 | # This plugin reduces AWStats speed of 10% !!!!!!! |
1364 | # LoadPlugin="timezone" |
1365 | # LoadPlugin="timezone +2" |
1366 | # LoadPlugin="timezone CET" |
1367 | # |
1368 | #LoadPlugin="timezone +2" |
1369 | |
1370 | # PLUGIN: Rawlog |
1371 | # REQUIRED MODULES: None |
1372 | # PARAMETERS: None |
1373 | # DESCRIPTION: This plugin adds a form in AWStats main page to allow users to see raw |
1374 | # content of current log files. A filter is also available. |
1375 | # |
1376 | #LoadPlugin="rawlog" |
1377 | |
1378 | # PLUGIN: GraphApplet |
1379 | # REQUIRED MODULES: None |
1380 | # PARAMETERS: [CSS classes to override] |
1381 | # DESCRIPTION: Supported charts are built by a 3D graphic applet. |
1382 | # |
1383 | #LoadPlugin="graphapplet /awstatsclasses" # EXPERIMENTAL FEATURE |
1384 | |
1385 | # PLUGIN: GraphGoogleChartAPI |
1386 | # REQUIRED MODULES: None |
1387 | # PARAMETERS: None |
1388 | # DESCRIPTION: Replaces the standard charts with free Google API generated images |
1389 | # in HTML reports. If country data is available and more than one country has hits, |
1390 | # a map will be generated using Google Visualizations. |
1391 | # Note: The machine where reports are displayed must have Internet access for the |
1392 | # charts to be generated. The only data sent to Google includes the statistic numbers, |
1393 | # legend names and country names. |
1394 | # Warning: This plugin is not compatible with option BuildReportFormat=xhtml. |
1395 | # |
1396 | #LoadPlugin="graphgooglechartapi" |
1397 | |
1398 | # PLUGIN: GeoIPfree |
1399 | # REQUIRED MODULES: Geo::IPfree version 0.2+ (from Graciliano M.P.) |
1400 | # PARAMETERS: None |
1401 | # DESCRIPTION: Country chart is built from an Internet IP-Country database. |
1402 | # This plugin is useless for intranet only log files. |
1403 | # Note: You must choose between using this plugin (need Perl Geo::IPfree |
1404 | # module, database is free but not up to date) or the GeoIP plugin (need |
1405 | # Perl Geo::IP module from Maxmind, database is also free and up to date). |
1406 | # Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl |
1407 | # module, so install it from elsewhere (from www.cpan.org for example). |
1408 | # This plugin reduces AWStats speed by up to 10% ! |
1409 | # |
1410 | #LoadPlugin="geoipfree" |
1411 | |
1412 | # MAXMIND GEO IP MODULES: Please see documentation for notes on all Maxmind modules |
1413 | |
1414 | # PLUGIN: GeoIP |
1415 | # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind) |
1416 | # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/geoip.dat[+/pathto/override.txt]] |
1417 | # DESCRIPTION: Builds a country chart and adds an entry to the hosts |
1418 | # table with country name |
1419 | # Replace spaces in the path of geoip data file with string "%20". |
1420 | # |
1421 | #LoadPlugin="geoip GEOIP_STANDARD /pathto/GeoIP.dat" |
1422 | |
1423 | # PLUGIN: GeoIP_City_Maxmind |
1424 | # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind) |
1425 | # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPCity.dat[+/pathto/override.txt]] |
1426 | # DESCRIPTION: This plugin adds a column under the hosts field and tracks the pageviews |
1427 | # and hits by city including regions. |
1428 | # Replace spaces in the path of geoip data file with string "%20". |
1429 | # |
1430 | #LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat" |
1431 | |
1432 | # PLUGIN: GeoIP_ASN_Maxmind |
1433 | # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind) |
1434 | # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPASN.dat[+/pathto/override.txt][+http://linktoASlookup]] |
1435 | # DESCRIPTION: This plugin adds a chart of AS numbers where the host IP address is registered. |
1436 | # This plugin can display some ISP information if included in the database. You can also provide |
1437 | # a link that will be used to lookup additional registration data. Put the link at the end of |
1438 | # the parameter string and the report page will include the link with the full AS number at the end. |
1439 | # Replace spaces in the path of geoip data file with string "%20". |
1440 | # |
1441 | #LoadPlugin="geoip_asn_maxmind GEOIP_STANDARD /usr/local/geoip.dat+http://enc.com.au/itools/aut-num.php?autnum=" |
1442 | |
1443 | # PLUGIN: GeoIP_Region_Maxmind |
1444 | # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind) |
1445 | # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPRegion.dat[+/pathto/override.txt]] |
1446 | # DESCRIPTION:This plugin adds a chart of hits by regions. Only regions for US and |
1447 | # Canada can be detected. |
1448 | # Replace spaces in the path of geoip data file with string "%20". |
1449 | # |
1450 | #LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat" |
1451 | |
1452 | # PLUGIN: GeoIP_ISP_Maxmind |
1453 | # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind) |
1454 | # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPISP.dat[+/pathto/override.txt]] |
1455 | # DESCRIPTION: This plugin adds a chart of hits by ISP. |
1456 | # Replace spaces in the path of geoip data file with string "%20". |
1457 | # |
1458 | #LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat" |
1459 | |
1460 | # PLUGIN: GeoIP_Org_Maxmind |
1461 | # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind) |
1462 | # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPOrg.dat[+/pathto/override.txt]] |
1463 | # DESCRIPTION: This plugin add a chart of hits by Organization name |
1464 | # Replace spaces in the path of geoip data file with string "%20". |
1465 | # |
1466 | #LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat" |
1467 | |
1468 | |
1469 | #----------------------------------------------------------------------------- |
1470 | # EXTRA SECTIONS |
1471 | #----------------------------------------------------------------------------- |
1472 | |
1473 | # You can define your own charts, you choose here what are rows and columns |
1474 | # keys. This feature is particularly useful for marketing purpose, tracking |
1475 | # products orders for example. |
1476 | # For this, edit all parameters of Extra section. Each set of parameter is a |
1477 | # different chart. For several charts, duplicate section changing the number. |
1478 | # Note: Each Extra section reduces AWStats speed by 8%. |
1479 | # |
1480 | # WARNING: A wrong setup of Extra section might result in too large arrays |
1481 | # that will consume all your memory, making AWStats unusable after several |
1482 | # updates, so be sure to setup it correctly. |
1483 | # In most cases, you don't need this feature. |
1484 | # |
1485 | # ExtraSectionNameX is title of your personalized chart. |
1486 | # ExtraSectionCodeFilterX is list of codes the record code field must match. |
1487 | # Put an empty string for no test on code. |
1488 | # ExtraSectionConditionX are conditions you can use to count or not the hit, |
1489 | # Use one of the field condition |
1490 | # (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOSTINLOG,HOST,VHOST,extraX) |
1491 | # and a regex to match, after a coma. Use "||" for "OR". |
1492 | # ExtraSectionFirstColumnTitleX is the first column title of the chart. |
1493 | # ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to |
1494 | # extract value from |
1495 | # (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOSTINLOG,HOST,VHOST,extraX) |
1496 | # and how to extract the value (using regex syntax). Each different value |
1497 | # found will appear in first column of report on a different row. Be sure |
1498 | # that list of different possible values will not grow indefinitely. |
1499 | # ExtraSectionFirstColumnFormatX is the string used to write value. |
1500 | # ExtraSectionStatTypesX are things you want to count. You can use standard |
1501 | # code letters (P for pages,H for hits,B for bandwidth,L for last access). |
1502 | # ExtraSectionAddAverageRowX add a row at bottom of chart with average values. |
1503 | # ExtraSectionAddSumRowX add a row at bottom of chart with sum values. |
1504 | # MaxNbOfExtraX is maximum number of rows shown in chart. |
1505 | # MinHitExtraX is minimum number of hits required to be shown in chart. |
1506 | # |
1507 | |
1508 | # Example to report the 20 products the most ordered by "order.cgi" script |
1509 | #ExtraSectionName1="Product orders" |
1510 | #ExtraSectionCodeFilter1="200 304" |
1511 | #ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi" |
1512 | #ExtraSectionFirstColumnTitle1="Product ID" |
1513 | #ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)" |
1514 | #ExtraSectionFirstColumnFormat1="%s" |
1515 | #ExtraSectionStatTypes1=PL |
1516 | #ExtraSectionAddAverageRow1=0 |
1517 | #ExtraSectionAddSumRow1=1 |
1518 | #MaxNbOfExtra1=20 |
1519 | #MinHitExtra1=1 |
1520 | |
1521 | |
1522 | # There is also a global parameter ExtraTrackedRowsLimit that limits the |
1523 | # number of possible rows an ExtraSection can report. This parameter is |
1524 | # here to protect too much memory use when you make a bad setup in your |
1525 | # ExtraSection. It applies to all ExtraSection independently meaning that |
1526 | # none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit. |
1527 | # If you know an ExtraSection will report more rows than its value, you should |
1528 | # increase this parameter or AWStats will stop with an error. |
1529 | # Example: 2000 |
1530 | # Default: 500 |
1531 | # |
1532 | ExtraTrackedRowsLimit=500 |
1533 | |
1534 | |
1535 | #----------------------------------------------------------------------------- |
1536 | # INCLUDES |
1537 | #----------------------------------------------------------------------------- |
1538 | |
1539 | # You can include other config files using the directive with the name of the |
1540 | # config file. |
1541 | # This is particularly useful for users who have a lot of virtual servers, so |
1542 | # a lot of config files and want to maintain common values in only one file. |
1543 | # Note that when a variable is defined both in a config file and in an |
1544 | # included file, AWStats will use the last value read for parameters that |
1545 | # contains one value and AWStats will concat all values from both files for |
1546 | # parameters that are lists of values. |
1547 | # |
1548 | |
1549 | #Include "" |
1550 |