Delete me: Software information: RaspberryPi: Beta RPi ROM (RC12) (Rev #4)

The download link provides the beta ROM image (a file ‘riscos’) that is provided in the Release Candidate 12 (RC12) SD card image for the Raspberry Pi computer to run RISC OS available now from ROOL on the RISCOSPi SD card.

RC12 itself (download link to Raspberry Pi foundation web site, which will be RC12 rather than RC11 real soon now) contains all the elements required to run RISC OS, including the firmware to initialise the Raspberry Pi as well as the HardDisc4 boot files, in an SD card image which can be written to a blank SD card.

Once written to the SD card all you have to do is turn on the Raspberry Pi and it will start up in RISC OS with a lot of preloaded software. The rom image is held inside $.!Boot.Loader where you will see the other firmware files as well:

Directory of SDFS::RISCOSpi.$.!Boot.Loader
.BOOTCODE/BIN     WR/     DOS       15:38:18 15-Nov-2013   17 kbytes
.CONFIG/TXT       WR/     DOS       14:25:06 31-Jan-2014   76  bytes
.FIXUP/DAT        WR/     DOS       23:27:58 17-Jan-2014    6 kbytes
.LICENCE/BROADCOM WR/     DOS       14:47:06 10-May-2012 1447  bytes
.RISCOS/IMG       WR/     &FE5      23:53:56 25-Feb-2014 2412 kbytes
.START/ELF        WR/     DOS       23:27:58 17-Jan-2014 2455 kbytes

The RISC OS rom image will be written to (hence updating the datestamp of the file) each time you shut down [this makes sure any ‘cmos’ settings are kept up to date] – the rom image is RISC OS 5.21 (25-Feb-2014).

These files appear to the Raspberry Pi as the only files in the FAT partition on the SD card as it starts up.

Within RISC OS you will see a complete hard disc of files which means that you can start right away:

When it first starts up you will be shown the Welcome Guide which explains how to use RISC OS and download more RISC OS software using either the !Store or the !PackMan utility. Each of these shows you a list of RISC OS software, with a detailed explanation of what each bit of software does and lets you choose which items to download.

There are other sites that explain about RISC OS as well – if you are new to RISC OS you should read some of the stuff listed here: Introduction to RISC OS – there’s lots of useful stuff to read.