Software information: RiscPC: NIC drivers (Rev #1)
Introduction
This archive contains disc-based (i.e. softloaded) drivers for the following Ethernet cards:
| Driver name | Chipset | Brand |
|---|---|---|
| EtherB | SEEQ 80C04/80C04A/8005 | ANT 1 |
| EtherH | Macronix MX98905 | i-cubed/DesignIT EtherLan 500 and EtherLan 600 |
| EtherH | Macronix MX98905 | Acorn AEH75/AEH62/AEH78 |
| EtherY | SMSC LAN91C111 | Castle Technology Net20/Net21 |
1 ANT cards based on the Myson MTD908F chipset are not supported.
Prerequisites
If you want to softload these drivers on older releases of RISC OS (e.g. 3.6 or 3.7) you must have an up to date C library installed (SharedCLibrary 5.34 or later, and CallASWI 0.02 or later). Updated versions can be found in the “System Resources” archive on the Miscellaneous downloads page.
If you are already running RISC OS 5, you do not need to download the “System Resources” archive.
ROM upgrade
It is also possible to upgrade the flash memory in the EtherH and EtherY cards, instead of softloading the drivers. This archive contains the necessary reprogramming tools.
If you have the EtherB card, RISC OS Open sell replacement ROM chips containing upgraded drivers – see the Merchandise page. Alternatively you can softload the drivers as mentioned above.
Social
and
ROOL Store
Buy RISC OS Open merchandise here, including SD cards for Raspberry Pi and more.