*ColourTransMap
ColourTrans
» *Commands
» *ColourTransMap
*ColourTransMap
Use
The purpose of this *Command is to set up the calibration table from its parameters. The number of parameters passed for each component must have been already specified using *ColourTransMapSize command.
Syntax
*ColourTransMap RRGGBBDD RRGGBBDD RRGGBBDD etc…
Parameters
| RRGGBBDD | Number to be placed in calibration table (8 digit hexadecimal number) |
Notes
This command is for internal use and should not be used.
See also
Social
Follow us on
and
and
ROOL Store
Buy RISC OS Open merchandise here, including SD cards for Raspberry Pi and more.