*Configure FontMax1
Programmer's Reference Manuals
» *Commands
» *Configure FontMax1
*Configure FontMax1
Use
This *Command sets the configured maximum height at which to scale from a bitmap font rather than from an outline font.
Syntax
*Configure FontMax1 max_pointsize
Parameters
| max_pointsize | Maximum height (pointsize) of font to scale from bitmap to outline font |
Notes
This setting is only valid with 4bpp screen modes.
Before this setting is used, the following checks are made;
- Look for f9999x9999 file of the correct size, then;
- Look for x90y45 font of the correct size;
- Check values in FontMax2 and FontMax3, then;
- Check values in FontMax4 and FontMax5, then;
- If the above checks fail to produce an output will it consider the value of FontMax1.
Pixel height = height in points x pixels per inch / 72
The pixel height varies depending on the different resolution of screen mode.
See also
Social
Follow us on
and
and
ROOL Store
Buy RISC OS Open merchandise here, including SD cards for Raspberry Pi and more.