*Configure FontMax4
Programmer's Reference Manuals
» *Commands
» *Configure FontMax4
*Configure FontMax4
Use
This *Command sets the configured maximum width at which to use horizontal subpixel anti-aliasing.
Syntax
*Configure FontMax4 max_width
Parameters
| max_width | Maximum width of font to use horizontal subpixel anti-aliasing (in Points) |
Notes
This setting is only valid with 4bpp screen modes.
Before this setting is used, the following checks are made;
- Look for f9999x9999 file of the correct size, then;
- Look for x90y45 font of the correct size;
- If the above checks fail to produce an output will it consider the values of FontMax2 and FontMax3, then FontMax4 and FontMax5
- If the font pixel width is less than or equal to FontMax 4, then it will look for the Outline file, and construct 4 anti-aliased bitmaps for each character.
- If the font pixel height is less than or equal to the height in FontMax5, then both horizontal and vertical subpixel anti-aliasing occurs. This equates to 16 bitmaps to be constructed per character.
Pixel width = width in points x pixels per inch / 72
The pixel height varies depending on the different resolution of screen mode.
See also
Social
Follow us on
and
and
ROOL Store
Buy RISC OS Open merchandise here, including SD cards for Raspberry Pi and more.