Extended Attributes API Specification

Introduction

ExtdAttrib distributes queries and changes on attributes. RISC OS standard file attributes are handled internally.

Each module which wants to provide additional attributes must register itself to this module. If a program requests attributes for a given file ExtdAttrib passes this attributes to the according module. These will fill the required attribute information into a attribute result list if they can. The information can be passed onwards to further modules if required.

The space of memory for the attribute result list is provided in general by the calling application but can be also allocated by ExtdAttrib inside its own dynamic area. The calling application can determine whether its request shall be fulfilled directly or in a multitasking way if possible. At the latter the caller will obtain a query handle which can be requested again and again until all attributes have been evaluated. The required size of the memory can be determined also. Because in general space of result belongs to the caller which might be swapped out during determining the attributes the values have to be cached locally in the handlers until the module which provides the information is polled again by ExtdAttrib.

The calling application has to pass on a list of attributes which it wants to obtain for a given file. Attributes are distinguished by tags. The attributes are obtained in the same order as given in the list which allows the calling program to fetch attributes which can be obtained without delay first and fetch attributes at the end whilst improving the obtained information continuously.

Attributes may be changeable and so ExtdAttrib provides a SWI with which an application can change changeable attributes of a given file. Even this operation can be performed in a multitasking way if desired.

What can you do with extended attributes?

The module overcomes some limitations of the OS. E.g. there are filing systems inside a multiuser network environment which are providing additional information about users which created or modified the files. The calling application (which is in general the filer) can evaluate this information on demand. Of course it must be prepared that not all attributes are available for all files.

Because ExtdAttrib provides handling of arbitrary attributes including sound and graphics it is easy to implement a thumbnail viewer with it. It also may provide graphical overlay information for the regular type icon which might eg. indicate which files are checked out from a file revisioning tool. You can also replace the icons for certain files however. Attributes can be used to filter files or to search for files. It is also possible to change attributes for some files like music files independently of the format.

Note this all this is not provided ExtdAttrib itself but may be provided by additional modules or calling programs.

ExtdAttrib can be also used to provide Copyright and usage information for programs or certain files like music file which can be played only a limited number of times. Of course handlers and programs must use random numbers as parameters and encrypted results in case that a secure information shall be returned whether a program/file license is valid or not. Even this can be regarded as a file attribute of course there are other ways of implementation and may be better ones for the same task too.

Using attributes in a client application

Your application has to enumerate the available attributes first by calling SWI ExtdAttrib 9. According to the reported attribute tags it has to decide whether to handle an attribute or not. If it wants to handle an attribute it should put it into a list of required attributes. These list of attributes must be fetched for every file for which your application wants to report the attributes. This is done by calling the SWIs ExtdAttrib 0-7. This operation might be performed in a multitasking way if your application and the according attribute handlers are supporting this. A multitasking query can be aborted by by calling SWI ExtdAttrib 8. You can choose to keep the result inside memory which is maintained by ExtdAttrib itself. In general you should not do so for this makes unnecessary usage of the unprotected public memory area. However if you are deciding to do so you need to tell ExtdAttrib when you are no longer using the result data by calling SWI ExtdAttrib 12. If the result of this query informs your application that an attribute is writable for the given file your application may provide a possibility to change the value of the attribute. The change itself should be performed by the application by calling the SWIs ExtdAttrib 16-23.

When copying, moving or deleting a file the according attribute information has to be kept uptodate. However nature of attributes is different. Some are included inside the file or maintained by the OS and other ones are stored inside a central DB. Some are retrieved only on demand from other kind of data (e.g. small pictures presenting the file content from the file itself). Sometimes it may not be sure that they must be copied e.g. think of files inside the folder of a versioning system. If you are creating a copy this doesn't necessary mean that you want to keep the copied files in the versioning process.

Concept needs to be discussed how to expand ExtdAttrib to allow copying/moving/deletion support.

Attributes

There is a descriptor for each attribute. It contains information about the type of the attribute, which determines how information is stored inside the query results and also provides some flags which tells you how an attribute is handled. Such a descriptor has the following format:

Byte Offset	Meaning
0	Size of entry including the size information but without alignment. The size of the optional data can be calculated from this value. The begin of the next entry must be word aligned. A 0 during a handler registration indicates end of list with supported attributes.
4	Attribute tag
8	Type of attribute Value Meaning Position inside query result attribute entries Modification format 0 Bit flag Four Bytes from offset 8 containing &00000000 or &00000001. Four Bytes from offset 12 containing &00000000 or &00000001. 1 32 Bit Integer Four Bytes from offset 8. Four Bytes from offset 12. 2 64 Bit Integer Eight Bytes from offset 8. Eight Bytes from offset 12. 3 Time or Duration For time GMT should be preferred at least for storage but this depends on the attribute. Same format as on fetching. Data starts from offset 12. 4 String Offset 8 gives offset from start of result query block to start of string. String has Unicode format and is terminated by 0. You can limit the maximal size on query. Same format as on fetching. Data starts from offset 12. Size is determined by size in offset 0 incl. the terminator. 5 Data fix sized Offset 8 gives offset to start of data from start of result query block. Size is determined by attribute. Data of fix size starts from offset 12. 6 Data flexible size Offset 8 gives offset to start of data from start of result query block. Offset 16 contains the data size. You can limit the maximal size on query. Data starts from offset 12. Size is determined by size in offset 0. 7 Icon information Offset 8 gives offset to start of sprite from start of result query block. Sprite data starts from offset 12.
12	Attribute flags Bit Meaning 0 Pass on behaviour if attribute is modified by this handler. 0 - Pass on 1 - Don't pass on 1 1 - Attribute is writable for this handler. 2 1 - Attribute needs to be handled separately which means that it is not a part of the file. 3 1 - Attribute is maintained by the filing system which includes moving/copying/deletion automatically with the according file. All RISC OS Standard file attributes must have this flag set. 24-31 Attributes which are depending on the type of attribute. Bit Type of attribute Meaning 24-25 7 Value Meaning 0 Attribute is no overlay. 1 Attribute is an overlay for identification purposes in small icon size. 2 Attribute is an overlay for identification purposes in big icon size. 3 Attribute is an overlay for identification purposes in arbitrary icon size.
16	Begin of optional attribute specific descriptor information.

You can obtain a certain attribute descriptor by calling the SWI ExtdAttrib 9. The same SWI is used to enumerate the available attributes.

The following attribute tags have been specified in the moment. All other values are preserved.

Group	Attribute tag	Name	Attribute type	Format of additional output if not determined by the attribute type.	Format of additional input if not determined by the attribute type.	Remarks
RISC OS	&00000000 - &0000001F	file attributes	0
	&00000020	Load Address	1
	&00000021	Execution Address	1
	&00000022	File type	1
	&00000023	Update time	3
	&00000024	File size	2
	&00000025	File size on disc	2
	&00000026	Icon big	7
	&00000027	Icon small	7
Names	&00000100	File path	4
	&00000101	File name	4
Extended times	&00000111	Creation time	3
	&00000112	Time of last access	3
User information	&00000120	Creation user	4
	&00000121	Update user	4
	&00000122	User of last access	4
Misc Type info	&00000150	File is for internal handling	0			To allow suppression of display of files used and maintained internally by the system
Special indication	&00000180	Name of sound indicating file type	4
Description	&00000200	File short description	4
	&00000201	File search keywords	4
Copyright	&00000300	Title	4
	&00000301	Author	4
	&00000302	Verlag	4
	&00000303	Date of publishing	3
	&00000310	Type of usage	1			The licenses tries to enumerate most of usual licenses for music, books, videos and programs. The field is for information only and not for blocking copying etc. Bits 0-15 are containing the number of parallel usably licenses for a unit e.g. a company or the allowed number of remaining usages. Unlimited usage is indicated by a value of &FFFF. A value of &0000 indicates unknown number. Bits 16-19 are containing a value which indicates kind of copying. Bits 16-19 Meaning &0 Unknown &1 No copying. &2 Backup-Copying. &3 Unlimited copying. Bits 20-27 are containing a value which indicates kind of ownership. Bits 20-27 Meaning &00 Unknown &01 Bought anonymous license. &02 Bought personal license. &03 Leased anonymous license. &04 Leased personal license. &05 Time limited anonymous license. &06 Time limited personal license. &07 Usage limited anonymous license. &08 Usage limited personal license. &09 Arbitrary modification allowed. &0A Arbitrary usage allowed. &0B Copyright maintainer.
	&00000311	Usage allowance	1	Value Meaning		User information (machine/user/local vary identification key) needs to be passed. Note that handlers may be complex including network synchronisation etc.. Can be used for software protection. Thinking about detailed concept is required.
Music	&00000400	Interpret	4
	&00000401	Type of music	1
	&00000410	Duration	3
User dependent preferences	&00000500	Rating	1
	&00000510	Play volume	1
Revision Handling	&00000600	Checkout state	1
	&00000610	Checkout overlay small	7
	&00000611	Checkout overlay big	7
Backup	&00000700	Date of last backup	3
	&00000710	Type of backup	1
	&00000711	Identifier of backup media	4
Graphics	&00000800	Icon flexible	7		Required size has to be set by caller
User range	&FFFFFFFF	Can be defined by the user as required
Internal usage	&FFFFFFFF			Indicates end of list

How to write a handler for attributes

If you want to write an attribute handler please note the following considerations. An attribute may be fetched and maintained by several handlers. This can make sense e.g. think of a handler which keeps music titles inside a separate DB but a title can be also optionally stored inside the music file itself at certain music file formats. However it is likely that there are restrictions on the title length on both handlers. So it makes sense to pass on a fetch to both handlers and to store the longest information in the result. If an attribute is modified it makes sense to pass the modification to both handlers so that each handler can store the information as good as it can.

It may be not easy to decide whether it is good to handle an existing attribute or whether to create a new one. Shall an icon generated by one handler modified directly by the second handler e.g. by pasting an overlay on it or shall an overlay provided. The second choice offers the possibility for the client to choose whether it wants to display the overlays or not and perhaps in case that there are several overlays in which order they shall be displayed. Attributes can be designed in some cases in such a way that they are of interest for a couple of programs. E.g. there may be several versioning tools but independently of the technical details the attributes may be the same. In general it would be glad if attributes are providing additional information that allow filer to handle attributes in a general way without having handling of every attribute hardcoded.

Please contact ... to obtain additional attribute tags.

When a handler is registered a tag is passed back to the handler as deregistration tag to allow a unique identification during the handler deregistration. Internally there are 16 Millions registrations possible until there will occur small problems within the handler priority handling. This shall be enough in practice for a solid operation.

A handler provides the information whether an operation is passed on in general or not inside the attribute descriptor. In real action the handler may behave different in certain special cases (that means that it prohibits a pass on whilst it reported that it is a pass on handler and vice versa) even in general it should behave as reported. A handler also passes a general priority information which affects all its attributes. Small values are meaning high priority and vice versa.

The handlers for an attribute are called in a certain order. The order is determined by sorting in such a way that handlers which are not passing operations on are called at the end of an operation. The next sort level is the priority information. The last sort level is the order of registration. Handlers which registered early are called at the end of an operation. The attributes which are handled by ExtAttrib internally are not passing on there results, have lowest priority level and are installed at first. So it is ensured that they are called at last.

A handler must be able to fetch or modify an attribute in a non multitasking way. It may offer the possibility to fetch/modify an attribute in a multitasking way. This concept has been chosen to ensure that programs can operate in a non multitasking way.

A handler modules isn't allowed to be relocated inside the RMA for there are absolute references.

Interfaces

---

ExtdAttrib_FetchAttribute

Fetches an attribute for a certain file.

On entry

R0 = Pointer to pollword (can be also used as identifier for the query).
R1 = Pointer to canonical file name.
R2 = Attribute tag.
R3 = Pointer to required attribute entry to obtain special request data.
R4 = Pointer to result entry for modification. May be 0 if only the required size has to be determined.
R5 = Pointer to data. This may be either free memory or the actual result. It can be 0 if there is no further memory or R4 is also 0 to obtain maximal amount of memory.
R6 = Maximal size of free memory or the actual result. The latter depends whether result is located immediately before free memory (purged flag set) or not. In first case it includes the free memory whilst in latter case it covers only the actually used memory. If R5 is 0 this value will be be also 0.
R7 = Information flags.

Bit	Meaning
0	1 indicates a new query, else it is a retry.
1	1 indicates that memory is purged which means that the result data is located in front of the free memory.
2	1 indicates that the fetch shall be done in multitasking mode if possible.

On exit

R0 = Result of fetch

Value	Meaning
<0	Error code which occurred inside the handler and should be passed on to Extdattrib and the client.
0	Noted for multitasking but not fulfilled yet. Try later again.
1	Result modified. Pass on.
2	Result modified. Don't pass on.
3	Result not modified. Pass on.
4	Result not modified. Don't pass on.
5	Want to modify. Purge up and retry.

R7 = If result is 1 or 2 this must contain the amount of modified additional memory data.

Use

A handler examines whether it can deliver or update an attribute result for the given file. If the fetch can be done in multitasking way it must note pointer to pollword and the pointer to the canonical file name. It can rely on these pointers and their content until a query is finished or aborted. It can't rely on the other pointers, so it may have to note the attribute specific data of the required attribute entry internally. Of course it must queue the request internally. After doing so it has to return a code of 0 in R0.

After a result has been determined inside a multitasking way it must be buffered until the handler is requested again. The handler must not write the result into the result entry or the result data memory whilst it is not requested for there may be parallel activities. After the handler has determined the result it has to set pollword to non zero. Therefore it should disable the interrupts, write the pollword word and reenable the interrupts. The pollword needs not to be set when the handler is in ExtdAttrib_FetchAttribute for the attribute.

If a handler can't find a result e.g. for the required attribute doesn't exists for the given file it shall leave everything unchanged and return a code 3 or 4 in R0. It shall also return code 3 or 4 in case that there is already a result but the handler doesn't want to modify it.

If a handler wants to modify the result of an attribute its behaviour depends on the kind of attribute and thereon whether there is already a result or not. In most cases it will be enough to set the values from offset 4 of the result entry onwards. Note that the handler has always (even for strings) has to return the exact size of required data memory in R7 in case where offset 8 contains a offset to additional data. At strings this must include the terminator. At the flags the handler must not change Bits 0 and 1 which are maintained by ExtdAttrib. After performing the update the handler must return a code of 1 or 2 in R0. In case that the pointer to the result entry is 0 the handler can't evaluate any existing result and can't write its own result. It simply has to pass back the required amount of memory in R7 to allow determination of result memory.

If an attribute makes usage of additional result data this data has to be placed at that location which is given by R5. The length must no exceed the value given in R6 and may be limited by additional information as told inside required attribute entry. Such a limitation has to be indicated by setting Bit 3 inside the flags of result entry. If the actual size is not big enough ExtdAttrib can be advised to rearrange the data in such a way that the additional result data for the actual attribute is located at the end of used memory. If this is the case or not will be indicated by the purged flag. If purged flag is 0 and more memory is required the handler can return a code of 4 to request a memory rearrangement after which ExtdAttrib will call the handler again with the purged flag set. The old entry can be overwritten and the additionally available memory can be used also. If there is still is not enough memory the handler shall use as much memory as available and makes sense (e.g. a string can be shortened but an icon of a specific size can't) and set Bit 4 inside the flags of result entry.

ExtdAttrib_Abort

Aborts a pending operation.

On entry

R0 = Pointer to pollword indicating the operation to abort.
R1 = Reason information. If 1 then pending modifications should be made.

On exit

Nothing returned.

Use

The handler removes any internal things related to a pending fetch or modification. The pending activity is identified by the pointer to pollword.

This call may be done as a result of a SWI ExtdAttrib 9 call. However it may be caused also by a RMKill of ExtdAttrib and it may occur in case of optimized modifications to force the handler to perform the delayed modifications.

ExtdAttrib_ModifyAttribute

Modifies an attribute for a certain file.

On entry

R0 = Pointer to pollword (can be also used as identfier for the query).
R1 = Pointer to canonical file name.
R2 = Attribute tag.
R3 = Pointer to modify attribute entry containing the modification data.
R7 = Information flags.

Bit	Meaning
0	1 indicates a new modification, else it is a retry.
1	Reserved
2	1 indicates that the modification shall be done in multitasking mode if possible.

On exit

R0 = Result of fetch

Value	Meaning
<0	Error code which occurred inside the handler and should be passed on to ExtAttrib and the client.
0	Noted for multitasking but not fulfilled yet. Try later again.
1	Modified. Pass on.
2	Modified. Don't pass on.
3	Not modified. Pass on.
4	Not modified. Don't pass on.
5	Modified in an optimized way. Pass on. This sets a marker inside ExtdAttrib that something is still open for this modification on this handler and it must be called at the end of modification by ExtdAttrib_Abort.
6	Modified in an optimized way. Don't pass on.This sets a marker inside ExtdAttrib that something is still open for this modification on this handler and it must be called at the end of modification by ExtdAttrib_Abort.

Use

A handler examines whether it can modify an attribute for the given file. If the modification can be done in multitasking way it must note pointer to pollword and the pointer to the canonical file name. It can rely on these pointers and their content until a modification is finished or aborted. It can't rely on the other pointers, so it has to note the modification data of the required attribute entry internally. Of course it must queue the request internally. After doing so it has to return a code of 0 in R0.

After a modification has been perfomed in a multitasking way the result must be noted until the handler is called again for the attribute. After the handler has performed the modification it has to set pollword to non zero. The pollword needs not to be set when the handler is in ExtdAttrib_ModifyAttribute for the attribute.

If a handler can't perform the modification e.g. for the required attribute doesn't exists for the given file it shall return a code 3 or 4 in R0. In case that a handler performed the modification it shall return a code 1 or 2 in R0.

A handler can collect a couple of modifications e.g. for the RISC OS standard attributes and modify them in one go at the end. However the handler doesn't know when the last attribute modification call happens. This may rely on the pass-on information of the other handlers too. Therefore it returns code 5 or 6 so that ExtAttrib knows that something must be done at the end and informs the handler by calling ExtdAttrib_Abort.

Service Calls

---

Service_ExtAttribStarting
(Service Call &)

On entry

On exit

Interrupt

Processor mode

Re-entrancy

Use

You must not claim this service call.

---

Service_ExtAttribStopping
(Service Call &)

On entry

On exit

Interrupt

Processor mode

Re-entrancy

Use

You must not claim this service call.

SWI Calls

---

ExtdAttrib
(SWI &)

Performs various actions to obtain and modify file attributes.

On entry

R0 = reason code
Other registers depend on reason code

On exit

R0 preserved
Other registers depend on reason code

Interrupt

Interrupts are enabled.
Fast Interrupts are enabled.

But see the remarks under Re-entrancy.

Re-entrancy

SWI is re-entrant but you should not make calls to it from interrupts for some common internal structures may be not valid if internal operations are interrupted. If required you shall put your interrupt into a callback to ensure integrity.

Processor mode

Processor is in SVC mode

Use

The particular action of ExtdAttrib is given by the reason code in R0 as follows:

R0	Action	Page
0	Fetches file attributes using File$Path non multitasking.	SWI ExtdAttrib 0-7
1	Fetches file attributes using a separate path string non multitasking.	SWI ExtdAttrib 0-7
2	Fetches file attributes using a path variable non multitasking.	SWI ExtdAttrib 0-7
3	Fetches file attributes non multitasking.	SWI ExtdAttrib 0-7
4	Fetches file attributes using File$Path multitasking.	SWI ExtdAttrib 0-7
5	Fetches file attributes using a separate path string multitasking.	SWI ExtdAttrib 0-7
6	Fetches file attributes using a path variable multitasking.	SWI ExtdAttrib 0-7
7	Fetches file attributes multitasking.	SWI ExtdAttrib 0-7
8	Aborts a pending operation in multitasking mode.	SWI ExtdAttrib 8
9	Fetches information about a tag and enumerates the tags.	SWI ExtdAttrib 9
10	Registers an attribute handler.	SWI ExtdAttrib 10
11	Deregisters an attribute handler.	SWI ExtdAttrib 11
12	Frees memory which has been automatically allocated by ExtdAttrib.	SWI ExtdAttrib 12
16	Modifies file attributes using File$Path non multitasking.	SWI ExtdAttrib 16-23
17	Modifies file attributes using a separate path string non multitasking.	SWI ExtdAttrib 16-23
18	Modifies file attributes using a path variable non multitasking.	SWI ExtdAttrib 16-23
19	Modifies file attributes non multitasking.	SWI ExtdAttrib 16-23
20	Modifies file attributes using File$Path multitasking.	SWI ExtdAttrib 16-23
21	Modifies file attributes using a separate path string multitasking.	SWI ExtdAttrib 16-23
22	Modifies file attributes using a path variable multitasking.	SWI ExtdAttrib 16-23
23	Modifies file attributes multitasking.	SWI ExtdAttrib 16-23

---

ExtdAttrib 0-7
(SWI &)

Fetches file attributes

On entry

R0 = 0 to 7
R1 = Pointer to object name.
R2 = Optional pointer to path string or path variable.
R3 = Pointer to attribute result memory block. If set to 0 and the maximal size of result memory is also set to 0 the maximal required size will be reported without generating the information.
R4 = Maximal size of attribute result memory block. Must be set to 0 if only the size should be fetched. If the value is non 0 but the pointer to resulting memory block is 0 Extdattrib will claim the required memory inside its own dynamic area. The claimed memory won't be larger than the value given in this register but may be smaller.
R5 = Pointer to list with required attributes.
R6 = Assigned query handle, must be 0 at start of a query.
R7 = Pointer to pollword evaluated at start of a query else ignored. If 0 at start of a query the pollword is automatically assigned by ExtdAttrib. If it is non 0 the value is taken as pointer to the pollword.
R8 = Reserved. Must be set to 0.

On exit

R0-R3, R5 preserved
R4 = size of used block when all attributes collected, else preserved.
R6 = 0 when all attributes collected else assigned query handle.
R7 = Pointer to pollword for query if query not finished yet. Is kept during a query.

Use

The operation code determines the kind of file path handling

Bit 1	Bit 0	Path used
0	0	File$Path system variable
0	1	path string pointed to by R2
1	0	path variable pointed to by R2
1	1	none

and the multitasking:

Bit 2	Multitasking mode
0	Single Task
1	Multitask

If SWI is multitasking it returns the query handle and an automatically allocated pollword in case that a part of the query is processed in multitasking mode. In this case the according part is stored internally. You can either call the SWI periodically if you like or you can wait until pollword becomes non zero. However don't make the assumption that if the pollword becomes non zero your query is entirely completed. It may only have become a bit more complete. So you may have to poll again and again.

The list containing the required attributes consists of one entry for each attributed with the following format:

Offset	Meaning
0	Size of entry (incl. this size field) a size of zero marks end of list but without alignment. The size of the optional data can be calculated from this value. The begin of the next entry must be word aligned.
4	Tag of the required attribute
8	Optional attribute specific data which format is determined by the attribute.

The result consists of an array of entries which is preceded by the number of array elements and followed by detailed data for each attribute if the information doesn't fit into the array entry. The array will be set up at start completely. However the contents of the entries may change until the query is finished. To find out whether an entry is valid please check Bit 0 of the flags of an attribute.

Offset	Meaning
0	Number of array elements.
4	Array of result entries. Each entry has the following format: Offset Meaning 0 Attribute tag 4 Flags Bit Meaning 0 Information is valid. May be invalid during queries in multitasking environments (Maintained by ExtdAttrib). 1 Attribute exists for the file (Maintained by ExtdAttrib). 2 Attribute is writable for the file 3 Data is incomplete due to limitation (only with attribute types 4 and 6). 4 Data is incomplete due to insufficient result memory. 8 32 Bit value or offset to data from start if available and required. 12 64 Bit value or size of data.

---

ExtdAttrib 8
(SWI &)

Aborts a pending operation in multitasking mode.

On entry

R0 = 8
R1 = Reserved. Must be set to 0.
R6 = handle of operation to abort.

On exit

R0, R6 preserved

Use

Aborts the operation belonging to the given handle in multitasking mode. You must not perform any queries or modifications using this handle until it is passed again towards you as a result of new file attribute information fetch/modification.

---

ExtdAttrib 9
(SWI &)

Fetches information about a tag and enumerates the tags.

On entry

R0 = 9
R1 = Reserved. Must be set to 0.
R2 = Flags with the following meaning:

Bit	Meaning
0	Set indicates that only the first entry shall of an attribute shall be reported.
1	If set then do not return exact entry for attribute tag and internal search tag but also allow the next entry in case that the given combination is not found. This Bit is set in general at start of an enumeration or request for a particular tag. In both cases the internal search tag must be set to 0 but in the first case the attribute tag must be set to 0 whilst it must contain the required tag in the later case.
2	If set only the actual attribute tag is allowed for the enumeration.
3 - 31	Reserved. Must be set to 0.

R3 = Pointer to resulting attribute descriptor memory block. If set to 0 and the maximal size of result memory is also set to 0 the maximal required size will be reported without generating the information.
R4 = Maximal size of result memory block. Must be set to 0 if only the size should be fetched. If the value is non 0 but the pointer to resulting memory block is 0 Extdattrib will claim the required memory inside its own dynamic area. The claimed memory won't be larger than the value given in this register but may be smaller.
R5 = Internal search tag. It shall contain the value returned by the previous call. &0 indicates first entry in list.
R6 = Attribute tag for which information should be obtained. &0 indicates first tag in list.

On exit

R0 preserved.
R2 = Bit 1 will be cleared.
R3 = Pointer to resulting memory block inside dynamic area of ExtdAttrib if 0 at entry and R4 non 0 else preserved. R4 = If the pointer to memory block is 0 at entry R4 will contain the required or allocated size to store the attribute descriptor including alignment.
R5 = Internal search tag of next tag.
R6 = Number of next tag. &FFFFFFFF indicates end of list.

Use

The request will return an attribute descriptor in the given memory which describes the given attribute. It also returns the attribute tag of the next attribute (in numerical ascending order) if available so that you can use this function to enumerate the attributes. The information is retrieved directly from the registered attribute handlers. There can be several handlers registered for the same attribute. All are enumerated one by one in the order of their calling making usage of the internal search tag. If setting Bit 0 of R2 only the first entries of the attributes are enumerated. However take into account that handlers may provide some flags in a different way and so you won't see the whole truth about an attribute if only evaluating the first handler entry.

An error is returned if no entry is found for the given attribute tag and internal search tag combination.

---

ExtdAttrib 10
(SWI &)

Registers an attribute handler.

On entry

R0 = 10
R1 = Module base address.
R2 = Pointer to registration block.
R3 = Handler private word.
R4 = Pointer to list of attribute descriptors.
R5 = Handler priority. 7 Bit Value. If you want to have your handler the lowest priority. You should set the value to &FFFFFFFF.
R6 = Reserved. Must be set to 0.

On exit

R0-R3, R5 preserved
R4 = Handler deregistration tag assigned by ExtdAttrib.

Use

Every attribute handler has to register itself using this SWI.

The registration block consists of the following entries:

Offset	Meaning
0	Size of registration block including size field
4	Offset of routine to fetch attributes for a file (ExtdAttrib_FetchAttribute)
8	Offset of routine to abort multitasking operation (ExtdAttrib_Abort)
12	Offset of routine to modify attributes for a file (ExtdAttrib_ModifyAttribute)

---

ExtdAttrib 11
(SWI &)

Deregisters an attribute handler.

On entry

R0 = 11
R1 = Reserved. Must be set to 0.
R4 = Handler deregistration tag.

On exit

R0, R4 preserved

Use

Handler is deregistered from ExtdAttrib. Pending modifications shall be perfomed by the handler. Pending queries must be dropped. ExtdAttrib will remove the handler from its internal structure. Pending operations will be continued at the remaining handlers if possible and the pollword will be set to non zero.

---

ExtdAttrib 12
(SWI &)

Frees memory which has been automatically allocated by ExtdAttrib.

On entry

R0 = 12
R1 = Reserved. Must be set to 0.
R3 = Pointer to memory which should been deallocated.

On exit

R0, R1, R4 preserved

Use

In some operations you can request that ExtdAttrib claims result memory for you inside its own dynamic area. If the memory is no longer used you must free it by using this SWI.

---

ExtdAttrib 16-23
(SWI &)

Changes attributes for a given file.

On entry

R0 = 16 to 23
R1 = Pointer to object name.
R2 = Optional pointer to path string or path variable.
R5 = Pointer to list with modified attributes.
R6 = Assigned query handle, must be 0 at start of a query.
R7 = Pointer to pollword evaluated at start of a query else ignored. If 0 at start of a query the pollword is automatically assigned by ExtdAttrib. If it is non 0 the value is taken as pointer to the pollword.
R8 = Reserved. Must be set to 0.

On exit

R0-R2, R5 preserved
R6 = 0 when all attributes modified else assigned modification handle.
R7 = Pollword for query if query not finished yet. Is kept during a query.

Use

The operation codes determine the kind of file path handling and the multitasking in the same kind as described under the fetching of attributes.

The list containing the modified attributes consists of one entry for each attributed with the following format:

Offset	Meaning
0	Size of entry (incl. this size field) a size of zero marks end of list but without alignment. The size of the modified data can be calculated from this value. The begin of the next entry must be word aligned.
4	Tag of the attribute which should be modified.
8	Number of modifications performed. Bit 31=1 indicates that modification is complete.
12	Modified attribute data which format is determined by the attribute.

The number of modifications is increased for every modification done by a handler. If used in multitasking mode the program can evaluate which attributes have been modified for the file.