*Configure FontMax1 (changes)

Showing changes from revision #5 to #6: Added | Removed | Changed

Programmer's Reference Manuals

» Part 17 - *Commands

» *Configure FontMax1*Commands - Sorted By Name?

*Configure FontMax1

Use

This *Command sets the configured maximum height at which to scale from a bitmap font rather than from an outline font.

Syntax

*Configure FontMax1 max_pointsize

Parameters

Notes

This setting is only valid with 4bpp screen modes.

Before this setting is used, the following checks are made;

1. Look for f9999x9999 file of the correct size, then;
2. Look for x90y45 font of the correct size;
3. Check values in FontMax2 and FontMax3, then;
4. Check values in FontMax4 and FontMax5, then;
5. If the above checks fail to produce an output will it consider the value of FontMax1.

Pixel height = height in points x pixels per inch / 72

The pixel height varies depending on the different resolution of screen mode.

See also

• Font_ReadFontMax
• Font_SetFontMax
• *Configure
• *Configure FontMax2
• *Configure FontMax3
• *Configure FontMax4
• *Configure FontMax5