*Configure FontMax5 (changes)

Showing changes from revision #3 to #4: Added | Removed | Changed

Programmer's Reference Manuals

» Part 17 - *Commands

» *Configure FontMax5*Commands - Sorted By Name?

*Configure FontMax5

Use

This *Command sets the configured maximum height at which to use vertical subpixel anti-aliasing.

Syntax

*Configure FontMax5 max_height

Parameters

Notes

This setting is only valid with 4bpp screen modes.

Before this setting is used, the following checks are made;

1. Look for f9999x9999 file of the correct size, then;
2. Look for x90y45 font of the correct size;
3. If the above checks fail to produce an output will it consider the values of FontMax2 and FontMax3, then FontMax4 and FontMax5
   • If the font pixel width is less than or equal to FontMax 4, then it will look for the Outline file, and construct 4 anti-aliased bitmaps for each character.
   • If the font pixel height is less than or equal to the height in FontMax5, then both horizontal and vertical subpixel anti-aliasing occurs. This equates to 16 bitmaps to be constructed per character.

Pixel height = height in points x pixels per inch / 72

The pixel height varies depending on the different resolution of screen mode.

See also

• Font_ReadFontMax
• Font_SetFontMax
• *Configure
• *Configure FontMax1
• *Configure FontMax2
• *Configure FontMax3
• *Configure FontMax4