Showing changes from revision #4 to #5:
Added | Removed | Changed
This *Command sets the configured boot action so that a Shift-power-on, shift-reset or Shift-Break runs a boot file.
*Configure NoBoot
None.
If the shift key is pressed when a machine is powered on, or reset, then a boot will take place.
The boot process looks for the &.!Boot
file, and runs it if it finds it, as set by the *Opt 4 command.
A boot process can be disabled at any time by issuing *FX 255 command.
NoBoot is the default setting.
Any change takes effect on the next power-on or hard reset.