OMAP 5 port status (changes)
Showing changes from revision #7 to #8:
Added | Removed | Changed
Overview
At present the port consists of three components:
- A HAL targetting TI’s OMAP5432 system-on-chip.
- The standard ‘HAL’ version of the RISC OS 5 kernel and the standard ROM modules
- Additional custom driver modules, e.g. EHCIDriver, OMAPHDMI as required
At present the port is known to be functional on the following hardware devices:
The port is currently a work in progress. Users with an adequate backup strategy in place may wish to try the new features present in thebeta versionOMAP 5 port has a stable version available to download. Users with an adequate backup strategy in place may wish to try the new features present in the beta version instead.
Current status
The RISC OS Roadmap covers items which are not specific to the OMAP 5, and the bug tracker covers defects in existing components. This table covers planned future tasks or areas that are yet to be implemented on OMAP 5.
| Enhancements to existing OMAP 5 functionality | ||
|---|---|---|
| Task | Description/Status | Assigned to |
| OMAP5 HAL – Audio | HDMI audio not supported (due to lack of documentation). Audio only available through on-board headset connector (J1500 for IGEPv5, or J13 for TI EVM). | Unassigned |
| OMAPHDMI | No support for 256 colour screen modes. Note that errata i596 precludes 1/2/4bpp entirely. | Unassigned |
| OMAPHDMI | Output drive of HDMI is weak, so many monitors can’t get lock, especially via passive HDMI to DVI adapters | Sprow |
| Unimplemented OMAP 5 features | ||
| Task | Description/Status | Assigned to |
| OMAP 5 – USB | Add support for USB 3.0 OTG controller | Unassigned |
Social
and
ROOL Store
Buy RISC OS Open merchandise here, including SD cards for Raspberry Pi and more.